1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Black Friday deals

Discussion in 'General' started by Greg S, Nov 26, 2024.

  1. Greg S

    Greg S #84 Machine

    Post up your findings

    Eurmax 10x10 Amazon $212 15% off

    harbor freight predator 3500 generator $599, $200 off

    can you tell I’m building a pit setup??
     
    Shenanigans and 418 like this.
  2. 418

    418 Expert #59

    Yeah I wouldn't be mad if I could find a deal in generator. 4500+ watts
     
  3. StaccatoFan

    StaccatoFan 48 Days....Pardon me while I wait patiently

    I got a Yamaha 4500 that needs a tune up. It has like 300ish hours I believe. It needs a new home.
     
    418 and Once a Wanker.. like this.
  4. Booger

    Booger Well-Known Member

    :crackup::crackup:

    I don’t have any leads on deals, but damn your avatar :crackup:
     
    Super Dave and auminer like this.
  5. Banditracer

    Banditracer Dogs - because people suck

    This reminds me, I need to look for a deal on a new chromebook.
     
  6. DBConz

    DBConz Registered Idiot

    their new 5000w inverter ones is $799 i think too
     
    Black89, 418 and Sabre699 like this.
  7. DJ Baker

    DJ Baker Well-Known Member

    Traeger pellet grills up to $300 off.
     
  8. RS_NX5

    RS_NX5 To finish first you must first finish - Ski

    "20% Off EVERYTHAAAAANG *Online Only" Through Midnight 3 December on Gustafson

    So if you need a windscreen or smth else, good idea to buy it now

    Those Airtech fairings ain't cheap
     
  9. rd400racer

    rd400racer Well-Known Member

    418 likes this.
  10. deathwagon

    deathwagon Well-Known Member

    Kore Essentials 20% off: GIFTKORE20

    Their gun belts are great.
     
  11. Black89

    Black89 Well-Known Member

    Was going to get this is it loud? Like the dual fuel can power the house when the power goes out.
     
  12. rd400racer

    rd400racer Well-Known Member

    Guy pitted next to me at Mid O this year had one and you can barely hear it. I just bought a WEN 3200 last year and I'm thinking about getting rid of it and getting this 5000.
     
    Black89 likes this.
  13. stickboy274

    stickboy274 Stick-a-licious Tire Dude

    Pixelator and Once a Wanker.. like this.
  14. Once a Wanker..

    Once a Wanker.. Always a Wanker!

    Garmin Zumo XT was back in stock at Kohls yesterday afternoon. Bought a second one for a gift.
     
  15. d1andonleebaconator

    d1andonleebaconator Active Member

    I’ll be running Woodcraft warmers and slicks for the first time next year. I need to buy a generator.
    I’m seeing the Wen generator on a legitimate sale at about ~$50 off (confirmed with Camel Camel Camel). Per woodcraft’s documents, it looks like this is well over capacity, even for running wattage ratings from Wen at ~1600W.

    Does anyone have experience with this brand? Go or no go?

    https://a.co/d/9lnWnrh
     
  16. rd400racer

    rd400racer Well-Known Member

    I bought a 3600W Wen from Wen last year. Ordered it on a Monday and it was on my porch Wednesday morning. They had it on sale for $400 then. We used it all season long, powered two sets of warmers and a couple fans when it was hot. Then we used it to power our trailer at night. It worked perfectly. Only downside is it only has a 5 hour run time. Kind of sucked at Nelson when it was 90 at night and our AC went out at 3am:D

    This was $400 last year.

    https://a.co/d/gSgoHlC
     
    418 and d1andonleebaconator like this.
  17. d1andonleebaconator

    d1andonleebaconator Active Member

    This is exactly the vote of confidence I need to move forward. I’m bummed that the larger capacity isn’t on sale, but I’ll only be running warmers on this. If I need another in the future, I’ll run in parallel or sell this and buy a larger one. Do you follow the owner’s manual to a t? They say to run it every month for half an hour. They mention to drain fuel as well, though there’s no mention of leaving stabilized stuff in there. Is 87 fine, or should I pick up 90 from Sheetz? I’ve seen other mentions of running the NGK plug and the magnetic oil dipstick. Thoughts on that? Any recommendations for an hour meter?

    Funny you mention you ran yours at Nelson’s. I’ve moved from bike to to “gear” spotting around the paddock in my down time, especially when I’m looking to buy some new gear. I remember only seeing one of these running there, and that was probably you. Small world!
     
  18. rd400racer

    rd400racer Well-Known Member

    We were there in June last year but couldn't make the September round. If it was June then it was probably us. I don't start mine once a month and run 87 in it. I had heard there was a spark plug issue but we've had no problems. I bought a couple spares, they're still in my tool box. About the only minor negative is that it's not Honda quiet, but it's not loud at all.
     
    d1andonleebaconator likes this.
  19. d1andonleebaconator

    d1andonleebaconator Active Member

    Thanks for your help. It’ll be here in the next week or so.

    I’m stoked to try to run a full race season next year. VMD and the September Nelson’s round wasn’t enough to scratch the itch this year.
     
    rd400racer likes this.
  20. Greg S

    Greg S #84 Machine

    Just picked up the predator3500 $639 otd in maryland
     
    418 likes this.

Share This Page