Unfortunately I'm familiar with detonation too:mad: These are larger sharp edge dents clearly caused by debris passing through, This is supported...
These stone guards may be adaptable to some stacks. I've heard from multiple sources that they actually gain 2-3 HP on a TZ750!! Just heresay...
You might consider total loss ignition? Lose the starter, stator, flywheel and 7 lb battery. Replace with one of the new A123 batteries that...
Yes it looks like most everything I find is 20mm. The R6 Cartridges have the top out spring mounted externally so that increased the outside...
I'm restoring a TZ750 to race and want to update the forks with modern cartridge internals. I usually use 2008 Yamaha R6 cartridges but the old TZ...
That looks like a fun bike but the countershaft sprocket is located too low in relation to the swingarm pivot. I may be interested in the...
Oh,... you had me reaching for my wallet, but I'm looking for the 3 spoke "classic" style.
Any of the mesh procedures are one shot deals, and are a real mess if they fail. A second repair is very difficult and unfortunately many fail....
I've been off the track for 30 years but always ran Goodyear slicks. Is there any decent rubber available for 18 inch rims? I have Dymags on a...
Google Shouldice hospital in Canada. They only do hernias, around 250 a day when I had mine done in 1982. They have a lower reocurrance rate than...
There are lots of parts available but they are scattered, so your search needs to be specific. This will get you started...
Thanks, I was told the rear rotor looked like Yamaha also. I checked again and the rear rim is actually a 4.5 but that was still pretty wide for...
Just bought a set of vintage Dymags and the front wheel has a lot of corrosion inside the rim area and can't be used. Judging by the sizes 18x3...
Very interesting... I have two Yoshimura close ratio gearboxes for the 500/550. The 5 speed came with some of the gears in OEM bags with part...
I think the real power difference is in the cams, not the FI. There's a popular cam swap where you use the gen1 exh cam on the intake side and the...
There's still a lot of meat in that starter clutch but weight around the perimeter is the most important. I'm also curious how much difference...
I know there's some other nice wheels out there but I'm just looking for the old style dyamags. I'm trying to be flexible on sizes because I may...
I'm looking for the "classic" H beam style wheels, not oval spoke or carbon types. Prefer fairly wide or modern sizes but am considering...
I need the old 3 spoke "H" beam style. 17's or 18's let me know what you have
Wow,.. All I need now is a bike with a bent frame and I'm there! I wonder what it will go for? I've been told by people who would know,.. that its...
Separate names with a comma.