Yoyodyne Slipper

Thinking about upgrading to the Yoyodyne Slipper on my 06 GSXR 750, anyone make the switch? or is it just hype?

 

real deal no hype vin

 

What's wrong with the stock one? They are adjustable you know...

 

Never had any issues with the stock slipper on the 05 1000 or 06 600

 

PM goodmatt78, he has a slipper mod for that bike.

I did it on mine and it worked well.

 

Thanks T, I assume you had the best of both worlds.

Thanks, I didn't know that...

 

Once I learned to adjust the one on my 07 1000 it works perfectly.

 

I had a yoyo on my 05 600 and it worked great and super smooth. I think it is better than the OEM, but not enough better to justify replacing the OEM one on the 06+ bikes.

The OEM one can be modified pretty easily to get much more slip than stock. It should have 2 reaction springs....cut off every 3rd tooth on 1 of those springs and it works really well IMO.....then adjust the lifter screws. I think mine are at 1.5 turns out.

 

Hmm good info ... Mite save me some money I rode a buddies bike with a STM in it and was really impressed guess ill have to try the mod before I drop $1000 on one

 

I have on an '05 GSXR-750 at Yoyo's recommended settings, it still wags it's tail on the way in. Guess I have to fuss with it more. Anyone got any setup info. that worked?

On another note my 1098 with OEM non slipper clutch is dead straight.

 

Ever thought your rear is wagging not due to the clutch but your chassis setup?

 

Def good information!! Thanks Matt

 

i just got mine in today.. we'll see how it goes!

 

You think can post when you're up and running, tested, etc...Thanks in advance

 

I have run an 05 gsxr 600 with an STM slipper clutch and also an 05 gsrx 1000 with a stock slipper clutch. The difference is night and day! With the STM you can actually feel the slipper clutch working through the clutch lever and is WORLDS above the stock slipper clutch. If the yoyodyne is as good as the STM then you will love it!