1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Witchkraft Racing 2015 Yamaha R1

Discussion in 'Bikes for Sale' started by ekraft84, Dec 7, 2016.

  1. ekraft84

    ekraft84 Registered User

    This is the Yamaha R1 we've run the past two seasons in WERA and MotoAmerica competition. We received the bike new, in the crate and have prepped and maintained it since. No detail overlooked. Bike is capable of front-running times at any track. Bike has won multiple races and championships.

    General Info:
    - 2015 & 2016 Multiple WERA Regional and National wins
    - 2015 WERA 1000 Superstock Champion
    - 2016 MotoAmerica 1000 Superstock NJMP - 4th/5th place finishes (Taylor Knapp)
    - 2016 Pittsburgh International Race Complex, Lap Record (Taylor Knapp)

    - Meticulously maintained. Reliable, fast and well sorted
    - Located in Michigan - can also deliver to Honda East in Maumee, Ohio

    Specifications, 2015 Yamaha R1:
    - Bike is currently owned by Honda East of Toledo (Honda, Yamaha, Suzuki, Kawasaki, Aprilia Dealer)
    - Never Titled / New owner will be first official owner
    - Chassis measured/optimized by GMD Computrack
    - Jamie Hanshaw Blueprinted Engine - (w/Motul 300V)
    - Transmission recall performed
    - Bike Dyno'd and mapped by Hoffer Performance (on Sunoco spec fuel, 110)
    - Yoshimura Alpha Exhaust System (Carbon)
    - Sharskinz Bodywork (Uncrashed)
    - Front Fender Mount Kit - allowing calipers to stay in place during wheel swaps
    - Professional paint job by Andrew Swenson Designs ($1,000 paint job)
    - Quick Release Bodywork Pieces w/R-clips (upper and lower)
    - Zero Gravity "Yamaha Race" Windscreen
    - SEO Composites Carbon Fiber Tank Shroud
    - K-Tech DDS Gas Cartridge Fork Kit - Built and Tuned Joe Kraft/Lenny Albin (freshened 09/16)
    - K-Tech DDS Shock (10 spring w/special Preload Piston) - Built and Tuned by Joe Kraft/Lenny Albin (freshened 09/16)
    - FTECU ECU/Electronics with Race Team Package
    - Dynojet Quickshifter w/Auto-Blip
    - YEC Kit Wiring Harness
    - YEC Kit Plugs (new 09/16)
    - Ballistic Lightweight Battery
    - MWR Air Filter
    - Spiegler Stainless Steel Brake Lines - Front/Rear
    - Vesrah Brake Pads and Castrol SRF Fluid (fresh fluid, 09/16)
    - Evol Technology Rearsets
    - Evol Technology Clip-Ons
    - LighTech Break-Away Levers (what Factory Yamaha MotoGP uses)
    - Motion Pro Revolver/Progressive Throttle
    - Ohlins Steering Damper
    - Pit Bull Sprockets / 520 DID Gold Chain
    - Spider Grips
    - Samco Hose Kit (Custom, black)
    - Lightened Rear Brake Rotor
    - Fast Frank Captive Wheel Spacers - Front and Rear
    - Fast Frank Captive Rear Brake Caliper - for quick wheel swaps
    - Yoshimura Case Covers
    - Pit Bull Swingarm Spools
    - Yoyodyne Keyless Gas Cap
    - Cox Racing Radiator Guard
    - Kit Radiator Cap
    - Adjusted Stock Slipper Clutch
    - Dunlop Race Tires (1 race)
    - Wired to WERA/CCS spec
    - Bike completely torn down/rebuilt - swingarm, linkage, steering stem, rotors honed, etc. (09/16)
    - Other bits and pieces we're forgetting

    Price Details:
    - $22,900 - complete package listed above.

    - Optional WERA SBK/MotoAmerica Superstock Brembo master cylinder/calipers/brake pads.
    - Optional Fast Frank quick change rear axle. Inquire for details.

    Please contact with any questions. I'll get additional photos posted as well.

    Thanks.
     

    Attached Files:

    kman37, dsmitty37, tigerblade and 2 others like this.
  2. ekraft84

    ekraft84 Registered User

  3. jkraft

    jkraft Well-Known Member

    bump for a great bike and an ok rider :clap:
     
  4. HEF211

    HEF211 Well-Known Member

    Bump for Ed...
     
    ekraft84 likes this.
  5. ekraft84

    ekraft84 Registered User

    Stationary, non-wheelie photos.
     

    Attached Files:

  6. TLR67

    TLR67 Well-Known Member

    So friggn tempting.....
     
    Stephen81 and ekraft84 like this.
  7. gcally

    gcally Well-Known Member

    I love how your garage is nicer than most people’s kitchen.
     
  8. Funkm05

    Funkm05 Dork

    Did you mention the special, geriatric seat pad in the ad? :Poke: :D
     
  9. ekraft84

    ekraft84 Registered User

    That's a custom $150 add-on included, but I'll swap a stock seat for anyone who would prefer. :)
     
  10. ekraft84

    ekraft84 Registered User

    Price dropped to $22,400. Thanks.
     
  11. ekraft84

    ekraft84 Registered User

  12. ekraft84

    ekraft84 Registered User

  13. RRRAcer

    RRRAcer Well-Known Member

    Drooool... glws
     
    ekraft84 likes this.
  14. WANABE RACER

    WANABE RACER Well-Known Member

    I cant believe no one has bought this bike!
     
    ekraft84 likes this.
  15. ekraft84

    ekraft84 Registered User

    I know!
     
    WANABE RACER likes this.
  16. jkraft

    jkraft Well-Known Member

    git up there
     
    Wheel Bearing and WANABE RACER like this.
  17. ekraft84

    ekraft84 Registered User

    Price chop - $19,900. Have to get the next bike ready.

    Hard to find a better, top-level prepped and proven 1000 in the country, at this price..
     
  18. jeffr1ey

    jeffr1ey Well-Known Member

    what's the next bike? :O
     
    WANABE RACER and rk97 like this.
  19. racer880

    racer880 Banned

    Giving it away .
     
    ekraft84 likes this.
  20. Wheel Bearing

    Wheel Bearing Professional low sider

    What you should do is get a 1299 for this year...so I can buy it this time next year. :D

    Always admired the attention to detail on your bikes, one of the rare times I would buy (if in the market) it sight unseen and have it shipped.
     
    Victor and ekraft84 like this.

Share This Page