Hey sorry i searched and could not find an answer to my problem. well first problem i did a ccs race at roebling, and i crashed at turn 4. NOW the bike will not turn over. I hear the click, the motor is not seized up, there is no hydrolic(sp) lock, the clutch and side stand things are connected, and there is power on my kill switch, and a current through my starter button. when i lowsided, the starter switch came into contact with the ground and is about 50% grown down. im a thinkin i blew the starter. any ideas? John Von Kaenel
You can check the starter by quickly touching the 2 large bolts on the starter relay with a screw driver. That will by pass the relay. If the starter turns over then the relay is more than likely the problem. Oh use a old screw driver it will try to weld itself in place, you might have messed up the battery in the fall.
