1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

R6 and SV gearing for Road A....

Discussion in 'General' started by Craig Montgomery, Jun 23, 2003.

  1. Craig Montgomery

    Craig Montgomery Well-Known Member

    I was wonder what typical gearing for a 2002 Yamaha R6 and a 2001 SV 650 would be? Any help would be appreciated.
     
    Craig Montgomery, Jun 23, 2003
    #1
  2. kyle ray

    kyle ray huuhh, he said member

    15/44 on the sv
     
    kyle ray, Jun 23, 2003
    #2
  3. Craig Montgomery

    Craig Montgomery Well-Known Member

    Thanks for the reply Mr Ray...

    Just wanted to add that the SV is a cup bike....prolly about 72 HP
     
    Craig Montgomery, Jun 23, 2003
    #3
  4. kyle ray

    kyle ray huuhh, he said member

    i ran a 73hp cup bike and did 1:35:0's, so it should do you good. you'll probably be grabbing another gear in the esses now.
     
    kyle ray, Jun 23, 2003
    #4
  5. UGA Dawg

    UGA Dawg Fertile Member

    Some of us had 68 HP during the cup race.:( EEESH! Funny, two days before I had 71.8. I would start off with 15/45. then, if you are running out of revs on the back straight and going into five in the esses, bump down a tooth on the rear.
     
    UGA Dawg, Jun 23, 2003
    #5
  6. Joe Morris

    Joe Morris Off The Reservation

    I hope you fired your mechanic!
     
    Joe Morris, Jun 23, 2003
    #6
  7. Craig Montgomery

    Craig Montgomery Well-Known Member

    El bumpo...

    Does anyone out there still ride an old school R6?
     
    Craig Montgomery, Jun 24, 2003
    #7

Share This Page