Quickshifter, Slipper Clutch for 1st gen R6

If you have one or know of one please let me know.

Non fuel injected bike, help will be great.

[email protected]

 

I can offer a stand-alone Quick Shift unit for US$75 for the controller and $125 for the sensor (comes with 2x 80mm rods, 1x 35mm LH/RH adjusting rod, 4x M6-RH nuts, 1x M6-LH nut), specify PUSH or PULL.

The controller has a setting screw for kill time. It plugs into the rear brake and sidestand switch plugs for power and 'safety system' override. If your bike has any of these connectors removed, I can either offer a splice-in unit, or a set of matching pigtails to replace the cut-away parts (+$5 for a set). All splice-in wires and replacement pigtails will be colour-matched for wiring, to make life easier.

For some models, the connector selection is a little confusing, so I may ask you to confirm which switch connector is which style - is it rectangular, is it hockey-rink shaped, is it two bullet connectors ...