Parting out 2006 Triumph 675 Racebike

I've sold about half of the parts already and here's what I've got left:


1 set of black Woodcraft clipons $90


1 Subframe w 2 battery boxes and battery…Black and straight .... it has one bodwork mounting nut stripped out though. $120

I’ve got 2 wheelsets. ALL are 100% straight.
First set is complete with rotors... $650
Second set is missing the front rotors...$500

Sharkskins bodywork (upper, lower, fender, and tail), stock tank (hammered on the side but holds fuel), and Dzus fasteners. Its been crashed but repaired. Could prolly use a sand and paint though.
$350

1 new clear aftermarket windscreen $25

Cluster with 2,xxx miles. Plastic cover is broken but they are 100% functional.
$130

Cluster with 1,500 miles. Mint with a nick on the front plastic but barely noticeable.
$250

1 Stock fairing stay (useable and fixed w/ JB weld) $50

1 Ram air snorkel left $75

Penske Triple sprung for 175 lb rider $675

Upper Triple $75

2 Lower Triples $60 each

PC3 $180 (the map in it cost me more

Throttle bodies $75 R

Radiator $75

Riders Seat $30

Rear Master with steel braided line and rear caliper $75

Gearing stock 525...Lemme know what ya need

Levers both brake and clutch

 

pics to [email protected] please


Sharkskins bodywork (upper, lower, fender, and tail), stock tank (hammered on the side but holds fuel), and Dzus fasteners. Its been crashed but repaired. Could prolly use a sand and paint though.
$350

 

I need just the front rotors... you got any?

 

I don't want to separate the front rotors but for $150 shipped I'd sell me.

 

sent you a pm

 

pm sent

 

What is the PCIII mapped for?
how old is the shock, last time serviced?

 

would like to hear details on the shock as well

 

The shock was refreshed and resprung in March of this year. It probaly has about 6 sprint days on it.

Radiator is sold and I also found a couple of other parts.

Update on what I've got left:


1 set of black Woodcraft clipons $90

1 Subframe w 2 battery boxes and battery…Black and straight .... it has one bodwork mounting nut stripped out though. $120

I’ve got 2 wheelsets. ALL are 100% straight.
First set is complete with rotors... $650
Second set is missing the front rotors...$500

Sharkskins bodywork (upper, lower, fender, and tail), stock tank (hammered on the side but holds fuel), and Dzus fasteners. Its been crashed but repaired. Could prolly use a sand and paint though.
$350

1 new clear aftermarket windscreen $25

Cluster with 2,xxx miles. Plastic cover is broken but they are 100% functional.
$130

Cluster with 1,500 miles. Mint with a nick on the front plastic but barely noticeable.
$250

1 Stock fairing stay (useable and fixed w/ JB weld) $50

1 Ram air snorkel left $75

Penske Triple sprung for 175 lb rider $675

PC3 $180 (the map in it cost me more

Throttle bodies $75

Riders Seat $30

Gearing stock 525 size 1 down the front and 1 up and 1 down on the rear...Lemme know what ya need

Levers both brake and clutch

Woodcraft case covers
Oil Pump cover is mint and stator cover has some rash but I have new slider for it.

Stock stator covers with stators in them as well.

 

Penske is sold...

 

Clipons are sold....

 

1 set of wheels with rotors sold.

 

whats the price on the woodcraft case covers?

thanks

 

PC3 is sold.

Ignition cover (mint) $75 plus shipping.
Stator cover (rashed but w new slider) $150 plus shipping
I also have a spare stator $50

 

Cluster with broken cover is sold.


Update on what I've got left:


1 Subframe w 2 battery boxes and battery…Black and straight .... it has one bodwork mounting nut stripped out though. $100

One wheelset left
100% straight
Complete rear wheel with rotor, front rim is missing the front rotors...$500

Upper Triple $75

2 Lower Triples $60 each


Rear Master with steel braided line and rear caliper $75


Sharkskins bodywork (upper, lower, fender, and tail), stock tank (hammered on the side but holds fuel), and Dzus fasteners. Its been crashed but repaired. Could prolly use a sand and paint job but I ran it like it sits.
$300

Spare dented tank $60

1 new clear aftermarket windscreen $25

Cluster with 1,500 miles. Mint with a nick on the front plastic but barely noticeable.
$250

1 Stock fairing stay (useable and fixed w/ JB weld) $40

1 Ram air snorkel left $70

Throttle bodies $70

Riders Seat $30

Levers both brake and clutch

Woodcraft case covers
Ignition cover (mint) $75 plus shipping
Stator cover (rashed but w new slider) $150 plus shipping
I also have a spare stator $50.

Stock stator covers with stators in them as well.

One damaged head from a dropped valve and some spare bottom ends

 

Both clusters and gearing sold.

 

All wheels sold. Update on what I've got left:


1 Subframe w 2 battery boxes and battery…Black and straight .... it has one bodwork mounting nut stripped out though. $100

Sharkskins bodywork (upper, lower, fender, and tail), stock tank (hammered on the side but holds fuel), and Dzus fasteners. Its been crashed but repaired. Could prolly use a sand and paint though.
$300

Spare dented tank $60

1 new clear aftermarket windscreen $25

1 Stock fairing stay (useable and fixed w/ JB weld) $40

1 Ram air snorkel left $70

Upper Triple $75

Lower Triple $60

Rear Master with steel braided line and rear caliper $50


Throttle bodies $70

Riders Seat $30

Levers both brake and clutch

Woodcraft case covers:

Ignition cover (mint) $75 plus shipping
Stator cover (rashed but w new slider) $150 plus shipping
I also have a spare stator $50.

Stock stator covers with stators in them as well.

 

can i get pics of the ram air,fuel tank and fairing stay sent to [email protected]

 

Oil pump cover, upper fairing stay, and snorkel are sold.

 

thanks, payment sent on the snorkel and upper stay