Help with 2008 R6

Looking for Advice on swapping the swing arm out on the ole R6. Needs to go from one frame to another, looking for the spec tool needed for the job.


Thanks in advance all.

 

motion pro sells the spanner socket. About $30 or so.

 

Thank you, I'll hop on their site and locate it!


Much appreciated

 

The spanner wrench that comes in the tool kit?


If so, I rhink I have one you can have.

 

watch ya don't lose the needle bearings in the swingarm linkage. Not the actual swing arm pivot (those are held in with a race) but the linkage joints. All those are loose needle bearings. If light on grease, some will fall out. Even losing one will mean excess up-down free play in the swingarm.