1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2005 zx6r race bike complete part out

Discussion in 'Parts for Sale' started by JCP636, Dec 23, 2010.

  1. JCP636

    JCP636 Well-Known Member

    Most of these prices are firm, they're priced to sell, so please limit the haggling. Prices do NOT include shipping. I'll try to check back here often, but email any questions you have to [email protected] for a quicker response.

    I do NOT have the ram air tube or upper fairing stay.

    Frame $900 (straight with clean PA title, I am the original owner)

    Motor $850 (30k+ street miles 1 season racing, runs very strong, pulled
    120rwhp on the dyno mid season on race gas, never missed a shift)
    Airbox $50
    Throttle boddies $100
    Stock ECU $100

    Forks $450 (valved and sprung with racetech internals for 160lb rider)
    Stock shock $50

    2 sets of rims with rotors:
    First set $500 ($300 for front/$200 for rear)
    2nd set $450 (one of the front rotors is bent, but should be able to straighten) ($250 for front/$200 for rear)

    Triple $50
    Subframe $100 (straight)
    Swingarm $50 (tabs broken on both sides and some scratches, otherwise straight)

    Guage cluster $120 (25k miles)
    SS braided lines $50 (blue)
    Front calipers $75 ($40/each)
    Rear caliper $20

    Race fairings $200 (blue/white/green, pretty beat up but usable, they are in the same condition as mounted in the picture. I don't know about fixing them)

    2 gas tanks both dented on the right side but usable, the one is probably fixable.
    tank 1 $50 (bad)
    tank 2 $25 (worse)

    PC3 $100 (has 120rwhp U4.4 map on it from fast by ferracci, back of PC3 broke off in a crash but it still works fine)

    Rear sets $100 ($60/side)
    Rear set raisers $35
    Left clip on $20
    Vortex gas cap $45

    Full exhaust $300 (Arrow headers $250 almost new, stock mid pipe, Akra slip on $100 has some minor dents)

    Stock Head lights $50
    Smoke flush mount front turn signals $35 (one side as a crack but still works fine)

    2 hubs $25/each
    front and rear axle $25/each

    I'm sure I forgot tons of stuff, so if you need anythign else just ask.

    OK so I can't upload a pic if I already used it on this site apparently... So here is my original for sale thread with a couple pics.
    http://forums.13x.com/showthread.php?t=270411
     
  2. JCP636

    JCP636 Well-Known Member

    Front master Cylinder $80
    Rear master cylinder $25
     
  3. JCP636

    JCP636 Well-Known Member

    Updated list, some prices changed. Some items sold.

    Frame $900 (straight with clean PA title, I am the original owner)

    Motor $850 (30k+ street miles 1 season racing, runs very strong, pulled
    120rwhp on the dyno mid season on race gas, never missed a shift)
    Airbox $50
    Throttle boddies $100
    Stock ECU $100

    Forks $450 (valved and sprung with racetech internals for 160lb rider)SOLD
    Stock shock $50
    GPR Damper and mount $225

    2 sets of rims with rotors:
    First set $450 ($275 for front/$175 for rear)
    2nd set $400 (one of the front rotors is bent, but should be able to straighten) ($225 for front/$175 for rear)

    Triple $50
    Subframe $100 (straight)
    Swingarm $50 (tabs broken on both sides and some scratches, otherwise straight)

    Guage cluster $120 (25k miles)
    SS braided lines $50 (blue)
    Front calipers $75 ($40/each)
    Rear caliper $20
    Front master Cylinder $80
    Rear master cylinder $25

    Race fairings $200 (blue/white/green, pretty beat up but usable, they are in the same condition as mounted in the picture. I don't know about fixing them)

    2 gas tanks both dented on the right side but usable, the one is probably fixable.
    tank 1 $50 (bad)
    tank 2 $25 (worse)


    PC3 $100 (has 120rwhp U4.4 map on it from fast by ferracci, back of PC3 broke off in a crash but it still works fine) SOLD

    Rear sets $100 ($60/side)
    Rear set raisers $35
    Left clip on $20
    Vortex gas cap $45

    Arrow headers $250 (almost new fits stock mid pipe)
    Akra slip on $100 (has some minor dents)SOLD

    Stock Head lights $120
    Smoke flush mount front turn signals $35 (one side as a crack but still works fine)

    2 hubs $25/each
    front and rear axle $25/each

    I'm sure I forgot tons of stuff, so if you need anything else just ask.
     
  4. JCP636

    JCP636 Well-Known Member

    Akropovic slip-on sold
    Vortex gas cap sold
    Forks sold
    pc3 sold

    Clarification:
    Motor includes tb's, ecu, airbox, and ape manual cct
     
  5. JCP636

    JCP636 Well-Known Member

    Radiator sold
    Right side rear set sold
     
  6. streeteg

    streeteg Active Member

    posted in the wrong thread--- i got 100 bucks for the fairings cash in hand picked up in philly. Let me know...
    -Eric
     
  7. JCP636

    JCP636 Well-Known Member

    PM sent

    Motor Sold
     
  8. onequickmoto

    onequickmoto Member

    can i get a pic of that bad tank and do you have the top triple?
     
  9. Cujo1KRR

    Cujo1KRR Track Whore

    still got the exhaust??? pics pics?
     
  10. JCP636

    JCP636 Well-Known Member

    I still have both tanks the triples and the arrow headers. Pm's sent.
     
  11. gerontiev

    gerontiev Well-Known Member

    pm sent
     
  12. JCP636

    JCP636 Well-Known Member

    Replied
     
  13. JPthaJedi

    JPthaJedi Well-Known Member

    Lowest you'll take for the frame?
     
  14. 110lbrc51rider

    110lbrc51rider Active Member

  15. JCP636

    JCP636 Well-Known Member

    PM's replied. Frame is sold
     
  16. DaddyJama

    DaddyJama Member

    GPR Stabilizer?
     
  17. zx6rrider

    zx6rrider Well-Known Member

    Which turn signal is cracked? If the left is good I'd be interested in just it.
     
  18. JCP636

    JCP636 Well-Known Member

    I'm 90% certain it's the right, but I'll have to double check to be sure.
     
  19. zx6rrider

    zx6rrider Well-Known Member

    ok let me know. thanks
     
  20. zx6rrider

    zx6rrider Well-Known Member

    any chance you looked at the turn signals? Thanks
     

Share This Page