Looking for a fuel pump for an 03 sv650, tank too.
Alan, have you actually run your second gen without the ECT sensor and had it work out? I ask because if this works I would like to install a...
Doesn't the ECU use the temp sensor for mixture mapping?
I've used the Preval sprayers with a lot of different paints when I didn't feel like cleaning a gun and it does surprisingly well in most cases....
You could try this, they actually work pretty well. http://www.monstronix.com/pve267-p-56909.html
When you assemble the front end how easily does the second tube slide into the triples? Do you have to twist or tweek to get it into the upper...
The kart model will work but has limited inputs. The bike or car models have more inputs and can receive tach info in different ways than the wire...
If feeding a rope into the cylinder just remember that there are 2 TDC for each cylinder and one of them has both valves open. Could get ugly...
Thanks TWF. That should be more than enough to narrow it down.
Anyone know how to tell the difference between a first generation and second generation SV motor without taking it apart? Or if the motor serial...
I'm sure I read in another thread somewhere that you could call the AFF donation number and confirm a donation for something like this.
Level is a good starting point but every one is different and many people are more comfortable slightly nose down. It is really a personal...
Yes with the nose down on the seat your arms need to do more work and this can lead to tingling in the hands if you don't move them. All that...
Personally I use the clutch, If I'm tooling around on the cooldown lap I will sometimes shift clutchless (up or down, no problem and smoothly) but...
Could have them donate here, I guess you could have them send you a copy of the confirmation page when their done....
Is the RJL the only compound that Vesrah makes for the SV650 pads? I want to make sure that I get the same compound that I'm running now, I like...
OK, I bought my 03 SV650 prepped and I really like the Vesrah pads that the previous owner had in it but I can't identify the lining material. The...
The thing about sharkskinz that make them so tough is that they use as little resin as possible. The strength comes from the glass, excess resin...
Well there is 71 now so that's 5 posts, $25 to AFF.
OK, now this could get painful. :D
Separate names with a comma.
