I'm a big vw fan so would love a eurovan...but... Decent Eurovan : $10,000 - $20,000 Decent Astro: $5,000 I can't seem to find a...
just for clarification... zx6r inner tube (chromed shiny piece) has a bushing on the bottom. this would probably tear the Stuff out of a fork...
thanks for the suggestions! I think I'm going to see if I can find a deal on other forks just to get the bike going and in the mean time see...
1998 zx6r .. The bike has been laid down once on street before I bought it and then once in a light lowside. I've checked the forks and...
suggest using search function, lots of hits :up:
hey bro, it seems that not only do have the wrong rear spring, but that your springs are horribly uneven. A 1.0 Kg is a reasonably stiff spring...
your desired sag is usually in the range of 5 to 10 mm free sag (from unweighted to just bike weight) and 30 to 40 mm rider sag (from unweighted...
+1 = 2 for :up: could be fuel starvation, but generally my bike does this when i forget to hook up the carb pressure equalization line from...
160 sounds nice, quicker turn in and matches the bike/power :) pete, is that you ya old goat (Yellow FZR400 you used to run in Nesba?) ??
suggest setting the sag with a buddy, and having someone familiar with suspension setup shake the bike to set initial dampening.
http://www.cwmotorsport.com/video/ see above :) oregon cam original is large (250 meg), there's also a remastered version on that site....
http://www.cwmotorsport/video beaverun original file is on medium (of low medium and high) with 30 fps (of 15 or 30). They are durable,...
Generally for a racing engine you would use the higher acceptable clearance of ring gap to allow a little lower friction (though less life)....
It's not a performance modification, so if it doesn't affect safety (ridability of the bike) it should be legal. If you mount the camera forward...
Separate names with a comma.