I bought an M900 with really nasty gummed up carbs. I disasembled everything and decided to soak all the jets for a few days, before blowing them out. I have re-assembled everything, however, I have two air jets left, and I am not sure which goes where. One goes under the slide diaphram and the other threads into the airbox side on the carb mouth. One is significantly larger than the other. Anyhelp would be appreciated. Thank you, Rich
still looking I found a generic Mikuni BDST38 diagram. The air jet under the diaphram is called the "Main Air Jet 2" The air jet in the mouth of the carb in called the "Pilot air Jet 1" Can I assume tha thte pilot is smaller than the main? hmmm...
