F3 frontend, rear wheels...etc. possible Fz600 part out

I'm trying to drum up some money towards another bike, my FZ600 (Lance Yeager's old bike) has an F3 frontend, I think the stem and triples are stock...someone chime in here if you think they've been modified, They were revalved, I believe, complete with brakes,front wheel, woodcraft clip ons etc... $750., Two rear wheels, one F2, one F3, both have had hubs modified to work with FZ. with rotors $250. each? May work for FZR400? Supertrapp pipe. Kerker can, with header, looks like a Supertrapp too. chassis with engine needs rebuilding. Pm me with needs.

 

its f2 clamps with an FZ stem, so it won't bolt right back in a Honda. both rear wheels are F2.

 

Thanks Lance. Will they work on an FZR400?

 

they most likely will with different spacers

 

come on now... no one needs a frontend for their F2/3?

Make an offer. Don't be shy now...

 

Part it out.You'll have better luck,trust me.

 

i need one, but i dont have that kinda dosh to lay down on one

 

I am parting it out. I'll take $650. for the complete frontend with wheel, brakes, clip ons, etc...
F2 wheels, 2 rear, modified hub for FZ600, may work for FZR stuff? Make offer/s
FZ600 frame, swing arm, fox shock,tank, `03 ZX6 bodywork, early `90's TZ250 tail, 2 FZ600 engines, one spare, condition unknown, one needs rebuild,carbs, total loss electrics, battery, woodcraft/raask rearsets, all you need to race your FZ600.
Make offers.
Bought an SV, really need money. my disappointing F-ed up loss is your gain.

 

what kind of "dosh" do you have to lay down on it?

 

Got a picture of the TZ tail?

 

Part out the front end.You'll have better luck selling it all.

 

Forks-$300.
Front wheel with pirelli rain tire $200.
Front brake system, calipers,ss lines, master cylinder, lever $175.
rear wheels $225. each
frame, tank, swingarm,rearsets, fox shock, subframe, $750.
fairing with tz tail, front fender $150.
also have `01 tz250 tail, uncut,very good condition $125.
fz600 engines $250., one from bike with carbs,
$100. for the spare.
Kerker pipe came with bike $100.
Supertrapp pipe $150.

 

There is a picture of the bike (inclding tail section) in another ad, do a search. try FZ600.

 

ttt

 

F3 front fender?

 

I'm not sure what kind of fender it is. Check photo on the ad in the parts section.

 

Cheap Cheap, CHEAP prices!!!

Clip ons for F2/F3 $100.( Vortex?, Woodcraft? not sure, nice though, two piece
Forks-$275
Front wheel with pirelli rain tire, and rotors $200.
Front brake system, calipers,ss lines, master cylinder, lever $125.
rear wheels $175. each
frame, tank, swingarm,rearsets, custom subframe for mounting TZ tail, $350.
fairing with tz tail, front fender $80.
also have `01 tz250 tail, uncut,very good condition $100.
fz600 engines $100., one from bike with carbs,
$50. for the spare.
Kerker pipe came with bike $80.
Supertrapp pipe $100.
__________________

 

F2/F3 fender, I think, it's an Airtech, pretty solid. $25.00 plus shipping

 

Most of it on ebay now.

 

Bump

Free bump for a top notch guy/seller. Just got my shock :up: Excellent deal!!


Thanks Again
Peter