1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2016 ZX10R Part Out (Updated list and Lower Prices!!!)

Discussion in 'Parts for Sale' started by Goldie, Nov 17, 2024.

  1. Goldie

    Goldie Well-Known Member

    Call or Text me at 757-572-4410 if interested. I'm suuuuuper busy these days and not on the forums a lot! Call or text Swervin Kervin #951! I price dropped the parts to move! Shipping or PayPal fees not included... Serious Buyers ONLY!

    1,000 Rear shock - Ohlins TTX MKII KA-931 “Comes with Kyle Racing 0% shock link ($400 value) and extra Ohlins Spring” (Setup for 190 lbs Fast Bike Industries)
    900 Forks with "Andreani Superbike “Gas” cartridges" (Setup for 195 lbs by Fast Bike Industries)
    250 Front Wheel with Rotors (No spacers)
    250 Rear Wheel with Rotors (No spacers or cush drive/hub)
    40 Ohlins OEM Steering Damper "ECU" control module
    50 Ohlins Steering Damper (OEM)
    250 Bonamico Rearsets (Complete Kit), Right side needs a foot & Toe peg. Comes with custom "Galfer extended brake line, Quickshifter and linkage, and rear master cyclinder with resorvior delete"
    100 Triple Trees (Top and bottom)
    120 Subframe (No plastic undertail)
    80 Swingarm (Comes with Kawasaki Racing factory chain guard and Bike Master 8MM Swingarm Spoils)
    250 ECU with "Woolich Racing" software (autoblip, etc...)
    75 Factory OEM Wire harness
    75 OEM “Titanium” headers
    80 Fuel pump
    40 Rear OEM Nissan Brake caliper and braket (No pads)
    75 Gas Tank (Small dent on one side corner) Does not leak.
    80 Motion Pro quick turn throttle (Little rash on throttle tube end). Comes with the extra cams
    75 GB racing cover set (4 total). Clutch, Alternator and Pulse. Pulse cover has rash and will come with an extra rashed Alternator cover.
    10 R&G Racing Passenger Peg delete plate
    45 Vortex V2 Keyless Gas Cap
    60 Armour Bodies Pro Series “Belly pan” fairing
    35 Armour Bodies Pro Series “Tail” fairing. Some rash. Will mount with no issues.
    20 Armour Bodies Pro Series “Front Tire" fender
    80 Driven Sprockets and EK 3D 520X chain set: 17F/41R. Chain will need a new master link
    30 Woodcraft Key Delete
    70 Graves Quick Turn Progressive "Throttle Tube" (Design to work with stock housing & cables)
    40 Driven Captive Wheel Spacers (Front & Rear wheel sets)
    90 Radiator and fan and EvoTech Radiator Guard. Has small cosmetic dent. No leaks
    80 ZX10RR “Racing” exhaust hanger bracket (Came off the RR version)
    120 Grave 3/4 WORKS Cat Eliminator "Exhaust" (Mid-pipe & Can). The muffler has rash but fully functional. Will need a can bracket/clamp.
    45 Electronic OEM Quickshifter (This was my spare)
    50 Front EBC racing Brake Pads (Complete set) 90% left ( EBC GPFAX447HH)
    40 Clutch Purge with full length "CRG" Lever
    40 Driver’s Seat #1 (No Tears)
    25 Driver’s Seat #2 (Small tear on the corner)
    40 Air Box (No air filter)
    5 Coolant Overflow bottle
    20 Ram Air intake front. Cracked. Can be repaired with JB Weld
    40 Ignition coils (4x)
    45 Rectifier
    10 Rear wheel axles with adjustment blocks
    5 Front wheel axle
    10 Front Sprocket cover (Plastic)
    5 Tip over switch
    15 Front Fairing stay. little rash on ends, but will mount up with no issues.
    10 Stock Nissan rear brake pads (80% left)
    15 Swingarm “Mud guard”
    25 Rear Sprocket hub with Rubber Spacers
    15 Plastic tank Panels (Left & Right). Some rash on them
    20 Plastic Gas Tank Shroud
    15 Start/Stop kill switch (Right side)
    15 Left side Selector switch (Horn, power mode, etc…)
    5 Kick stand switch/sensor
    10 AIM solo 2 laptimer Holder
    15 Front wheel speed sensor
    Misc…
    15 Pitbull Tire Warmers control box stand
    15 Trackside Front wheel Stand
    20 Harbor Freight Rear Wheel Stand
    5 Hi Flo racing oil filter HF303RC (New)
    5 Kawasaki Oem Oil Filter (New)
     
    Last edited: Nov 17, 2024
  2. Goldie

    Goldie Well-Known Member

  3. Brianj666

    Brianj666 Well-Known Member

    How much for the hiflo oil filters to 98271?
     
  4. Goldie

    Goldie Well-Known Member

    I work for the government so
    Filters are $5 but probably best to sell them with additional parts purchase due to to shipping and paypal cost unless you are local. I only have 1 HiFlo and 1 OEM left.
     
    Brianj666 likes this.
  5. Goldie

    Goldie Well-Known Member

    Sold items as of 20 NOV 2024 from above list. Serious Buyers only needed to inquire about parts. Window shoppers need not apply! Lol

    - Front wheels with rotors
    - Rear wheel with rotor
    - Driven Captive Wheel Spacers
    - Gas Tank
    - BOTH oil filters
    - Vortex Keyless Gas Cap

    Swervin Kervin CCS Racer #951 Expert (Retired) :beer:
     
  6. WallyWiff

    WallyWiff Active Member

  7. Goldie

    Goldie Well-Known Member

    Sold items as of 21 NOV 2024

    - Graves Quick Turn Progressive "Throttle Tube"
    - Electronic OEM Quickshifter
     
  8. Goldie

    Goldie Well-Known Member

  9. Goldie

    Goldie Well-Known Member

    Sold items as of 08 DEC 2024

    - Forks - SOLD
    - Front Wheel Axle - SOLD


    I still have parts!
     

Share This Page