2015 BMW S1000RR Spec Sheet Price is $15,500 as it sits. Bike was purchased in 2018 from ex-Expert CCS/MA racer. The Good: Bike was immediately sent to KWS motorsports for a full teardown to frame and rebuild up. Every bolt, bearing and fitting was evaluated and replaced if it seemed worn out or thrashed. When rebuilt it was dyno’d by KWS and made 209 at the rear wheel on pump gas. Handles great, The Meh: Despite the awesome paintjob this is a race bike and as such its been used as hard as possible. It runs, turns as expected but there are small scrapes, nicks and blemishes associated with being a track only bike. It has been low sided in a precious life but was checked during the teardown and confirm as straight and true. Was raced in CCS and did track days through 2020. Was going to endurance race it but focusing on smaller bike in 2022. Not interested in parting it out yet. Engine & Drivetrain Tuned by KWS Motorsports and makes 209hp @ rear wheel // 215hp @ rear wheel on MR12 (Has two maps) Brentune Flash Dyno Jet PowerCommander 5 – for better fueling Alpha Racing ABS delete & Sensor rings Arrow Full titanium full exhaus DID ERV7 chain 520 conversion w/Superlite gearing (spares included) Factory Pro Shift Star Factory Pro heavy duty shift return spring Suspension (fresh service by MRP motorsports) Bitubo pressurized ECH29 Front Fork Race Cartridges Bitubo XXF rear shock (same as the ones touted by Alpha Racing Serviced in 2020 by MRP Suspension Services Wheels BMW HP Forged Superlight Wheels w/captive spacers (on the bike) BMW standard S1000rr wheels w/brakes (2 sets – one black and one grey. They are cosmetically rough but straight and true) Alpha Racing timing rings and cush drive components Controls Evol Tech race clip-ons 7 button race pod Attack Racing Rearsets Alpha racing Throttle (one modified and one spare) CRG SC2 clutch lever assembly Upgraded Quick Shifter Brakes Brembo Stylema caliper from V4R Magura Forged Front Master Cylinder Spiegler Custom Brake Lines (Front & Rear) Braketech ductile iron rotors SBS Race Pads (new) Lightened rear Brake General Hardware Motoholders Fairing Stay & Subframe Carbon Fiber Enlarged Air Intake Carbon Fiber Frame and swingarm covers Dry Brake standard sized gas tank Fast Frank quick-change endurance racing axles lightech chain adjusters Radiator & Oil protectors Includes some standard spares (e.g., old clip-\ons and partial rearsets – vortex; BMW std. sprockets carriers and gearing, nuts and bolts)