2003-04 ZX6R 636 Part Out- Akrapovic Full Exhaust, Woodcraft Rearsets, PCIII...

Discussion in 'Parts for Sale' started by mikdivad, Oct 17, 2010.

Page 1 of 2
  1. mikdivad

    mikdivad Well-Known Member

    UPDATED LIST: 10/17/2010

    Parting out a 2003 ZX6R 636 race bike with 8697 miles. Many OEM and aftermarket parts. I've included some pictures, but please let me know if you need more pictures by sending me your request with your email address.

    1. OEM Black Frame (Bill of Sale & GMD Computrak Straightened w/ paperwork to verify)—$300
    2. Stock Motor w/ 8697 miles & NRC Aftermarket Case Covers & 14T front sprocket (Transmission is damaged and will not shift gears, but engine fires up fine)- $200
    3. Stock Front and Rear Wheels w/ Brake Rotors (straight with no damage)- $250
    4. Akrapovic Full Exhaust w/ CF canister (some scratches on the can, but mounts up fine and looks good)- $350
    5. Woodcraft Rearsets w/ spare replacement parts (slight damage to right peg, but new spare included)- $150
    6. Power Commander III USB- $150
    7. K&N Air Filter- $25
    8. OEM Front Brake Calipers- $50
    9. OEM Front Master Cylinder- $25
    10. Galfer Stainless Steel Front Brake lines- $40
    11. OEM Front Seat- $25
    12. OEM Throttle Bodies- $50
    13. OEM Speedo w/ only 8697 miles (Broken mounting tab on the right side, but still mounts up fine)- $100
    14. OEM Front Brake Rotors- $50
    15. OEM Black Swingarm-$50
    16. OEM Lower Triple Clamp Tree- $50
    17. OEM Top Triple Clamp w/ Ignition Block, Ignition Wiring & Key- $50
    18. OEM Airbox- $20
    19. OEM ECU- $50
    20. OEM Complete Main Wiring Harness-$50
    21. OEM Radiator w/ Fan-$150
    22. OEM Coolant Overflow Bottle- $10
    23. OEM Front & Rear Axle- $10 each
    24. OEM Front Sprocket Cover- $10
    25. OEM Throttle Tube & Cables- $20

    All prices DO NOT include shipping. If there are any other parts you need from this bike that aren’t listed, let me know and I’ll see if I have it.

    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
     
    mikdivad, Oct 17, 2010
    #1
  2. stevedave

    stevedave Well-Known Member

    PM Sent...
     
    stevedave, Oct 18, 2010
    #2
  3. SSCustoms

    SSCustoms Well-Known Member

    Do you have a rear master cylinder and caliper?
     
    SSCustoms, Oct 19, 2010
    #3
  4. mikdivad

    mikdivad Well-Known Member

    Yep. I'll send you PM shortly about those parts.
     
    mikdivad, Oct 19, 2010
    #4
  5. shinoby81

    shinoby81 Member

    Interested in the motor. Is it still available, any clue how you damaged tranny.
     
    shinoby81, Oct 21, 2010
    #5
  6. mikdivad

    mikdivad Well-Known Member

    reply PM sent
     
    mikdivad, Oct 21, 2010
    #6
  7. mikdivad

    mikdivad Well-Known Member

    bump
     
    mikdivad, Oct 22, 2010
    #7
  8. keeena

    keeena Member

    Do you have the air intake duct (plastic part that mounts between the frame and front fairing) or Woodcraft slider parts?
     
    keeena, Oct 22, 2010
    #8
  9. mikdivad

    mikdivad Well-Known Member

    Sorry don't have any of those parts.
     
    mikdivad, Oct 22, 2010
    #9
  10. mikdivad

    mikdivad Well-Known Member

    PC3 is SOLD. Everything else is still available.
     
    mikdivad, Oct 27, 2010
    #10
  11. mikdivad

    mikdivad Well-Known Member

    bump
     
    mikdivad, Oct 29, 2010
    #11
  12. mikdivad

    mikdivad Well-Known Member

    UPDATED LIST: 10/31/2010

    Parting out a 2003 ZX6R 636 race bike with 8697 miles. Many OEM and aftermarket parts. I've included some pictures, but please let me know if you need more pictures by sending me your request with your email address.

    1. OEM Black Frame (Bill of Sale & GMD Computrak Straightened w/ paperwork to verify)—$300
    3. Stock Front and Rear Wheels w/ Brake Rotors (straight with no damage)- $250
    4. Akrapovic Full Exhaust w/ CF canister (some scratches on the can, but mounts up fine and looks good)- $350
    5. Woodcraft Rearsets w/ spare replacement parts (slight damage to right peg, but new spare included)- $150
    7. K&N Air Filter- $25
    8. OEM Front Brake Calipers- $50
    9. OEM Front Master Cylinder- $25
    10. Galfer Stainless Steel Front Brake lines- $40
    11. OEM Front Seat- $25
    12. OEM Throttle Bodies- $50
    13. OEM Speedo w/ only 8697 miles (Broken mounting tab on the right side, but still mounts up fine)- $100
    14. OEM Front Brake Rotors- $50
    15. OEM Black Swingarm-$50
    16. OEM Lower Triple Clamp Tree- $50
    17. OEM Top Triple Clamp w/ Ignition Block, Ignition Wiring & Key- $50
    18. OEM Airbox- $20
    19. OEM ECU- $50
    20. OEM Complete Main Wiring Harness-$50
    21. OEM Radiator w/ Fan-$150
    22. OEM Coolant Overflow Bottle- $10
    23. OEM Front & Rear Axle- $10 each
    24. OEM Front Sprocket Cover- $10
    25. OEM Throttle Tube & Cables- $20
    25. OEM Fuel Pump- $50
    26. OEM Gas Cap- $50
    27. OEM Rear Master Cylinder and Rear Brake- $50
    28. OEM Rectifier- $25
    29. OEM Ignition Switch- $25

    All prices DO NOT include shipping. If there are any other parts you need from this bike that aren’t listed, let me know and I’ll see if I have it.
     
    mikdivad, Oct 31, 2010
    #12
  13. Jordan

    Jordan Well-Known Member

    i'll take the rearsets. ship to 85305. send me your info.
     
    Jordan, Nov 2, 2010
    #13
  14. mikdivad

    mikdivad Well-Known Member

    reply PM sent with paypal payment info.
     
    mikdivad, Nov 2, 2010
    #14
  15. Leg_of_Tape

    Leg_of_Tape New Member

    Interested in just the front wheel, pm me with price if you are willing to sell separately from the rear!
     
    Leg_of_Tape, Nov 4, 2010
    #15
  16. mikdivad

    mikdivad Well-Known Member

    reply PM sent
     
    mikdivad, Nov 7, 2010
    #16
  17. mikdivad

    mikdivad Well-Known Member

    UPDATED LIST: 11/11/2010

    Parting out a 2003 ZX6R 636 race bike with 8697 miles. Many OEM and aftermarket parts. I've included some pictures, but please let me know if you need more pictures by sending me your request with your email address.

    3. Stock Front and Rear Wheels w/ Brake Rotors (straight with no damage)- $250
    4. Akrapovic Full Exhaust w/ CF canister (some scratches on the can, but mounts up fine and looks good)- $350
    7. K&N Air Filter- $25
    8. OEM Front Brake Calipers- $50
    9. OEM Front Master Cylinder- $25
    10. Galfer Stainless Steel Front Brake lines- $40
    11. OEM Front Seat- $25
    12. OEM Throttle Bodies- $50
    13. OEM Speedo w/ only 8697 miles (Broken mounting tab on the right side, but still mounts up fine)- $100
    14. OEM Front Brake Rotors- $50
    15. OEM Black Swingarm-$50
    16. OEM Lower Triple Clamp Tree- $50
    17. OEM Top Triple Clamp w/ Ignition Block, Ignition Wiring & Key- $50
    18. OEM Airbox- $20
    19. OEM ECU- $50
    20. OEM Complete Main Wiring Harness-$50
    21. OEM Radiator w/ Fan-$150
    22. OEM Coolant Overflow Bottle- $10
    23. OEM Front & Rear Axle- $10 each
    24. OEM Front Sprocket Cover- $10
    25. OEM Throttle Tube & Cables- $20
    25. OEM Fuel Pump- $50
    26. OEM Gas Cap- $50
    27. OEM Rear Master Cylinder and Rear Brake- $50
    28. OEM Rectifier- $25
    29. OEM Ignition Switch- $25

    All prices DO NOT include shipping. If there are any other parts you need from this bike that aren’t listed, let me know and I’ll see if I have it.
     
    mikdivad, Nov 11, 2010
    #17
  18. mikdivad

    mikdivad Well-Known Member

    bump
     
    mikdivad, Nov 13, 2010
    #18
  19. ski

    ski New Member

    636

    Iam looking for 636 master front brake clcynder for 2003 PLEASE CONTACT ME AT 347 2591437
     
    Last edited: Nov 15, 2010
    ski, Nov 15, 2010
    #19
  20. G Dawg

    G Dawg Broken Member

    I do not need the ignition, would you consider $75 shipped for the triple clamps?
     
    G Dawg, Nov 15, 2010
    #20
Page 1 of 2

Share This Page