1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2000 Honda RS125

Discussion in '2-Stroke Machines' started by Clint24, Nov 9, 2008.

  1. Clint24

    Clint24 Member

    2000 Honda RS125 – bike was purchased in 2006 for my son to start racing. He used it 6 weekends total in 2007, a complete engine rebuild kit was purchased from Rising Sun Cycles and installed in spring of 08 and the bike was used for 1 day (135km) in 2008. It is ready to go racing with tons of spare parts.

    2000 Honda RS125 (with many 2002 engine upgrades)
    • Complete engine rebuild by Patrice Goyette (Acceleration Racing), only has 135km on rebuild.
    • Showa front and rear suspension, rebuilt by Joe Skidd of Superior Suspension Settings.
    • Battle factory Rear Sets
    • Battle Factory Ignition Kill Shifter
    • Digital water temp. sensor
    • Ram air
    • Brand New Aftermarket Clutch basket
    • Front & Rear Stand
    • Bickle tire warmers (new)
    • 1 set brand new Bridgestone Supersoft slicks
    .

    Spare Parts: (email clint@accelerationracing for pictures and more info)

    • Cylinder and gaskets
    • Cylinder dowel pin
    • Engine mounting spacer and shims
    • VHM Cylinder Head with interchangeable combustion chamber
    • 98’ carburetor
    • Main Jets, Pilot jets & needles, misc. carb. Parts
    • 4 stock reed blocks
    • 1 V-Force reed block
    • 4 new HRC reeds
    • 1 set carbon fiber reeds & misc. reeds
    • 1 new spark plug
    • Intake boot
    • 7 New reed Gaskets
    • Rear Wheel inner hugger
    • 5 Clutch springs
    • 1 slightly used clutch pack
    • 1 Radiator Cap
    • OEM Shop Manual
    • 1 – Spare Tachometer – came with bike, I’ve never tried it.
    • 1 – Detonation Counter – came with bike in box, I’ve never used it
    • 1 – Ignition switch
    • 2 – Clutch cable
    • 1 – Throttle cable
    • 1 – Cylinder Head gasket – large O-ring
    • Misc. Rear Set Brackets
    • 1 – Throttle Tube
    • 4 - Exhaust manifolds
    • Misc. Levers and perch
    • 1 – Chain Adjuster
    • 2 Handlebar ends
    • Cowl stay
    • 1 – Windscreen
    • 1 – Clutch basket
    • 1 – Chain
    • 1 set used brake pads
    • 2 mufflers – different lengths
    • 1 – outer fork tube
    • 6 – fork bushings
    • 2 – fork seals
    • 2 – fork pinch bolts
    • 1 – fork washer (internal)
    • 11 - Front Sprockets
    • 1 – 14t
    • 3 – 15t
    • 4 – 16t
    • 3 – 17t
    • 1 – Fr. Brake Disk (full floating)
    • 1 – chain slider
    • 2 – rear brake reservoirs
    • 3 – shock springs
    • 1 – steering damper
    • 2 sets fork springs and 2 misc.
    • 1 - Countershaft seal
    • 2 – Countershaft sprocket washer
    • 2 – Countershaft sprocket bolt
    • 5 – footpegs, misc.
    • 4 – windscreen fasteners
    • 14 - Rear Sprockets
    • 1 – 32t
    • 1 – 34t
    • 1 – 35t
    • 5 – 36t
    • 4 – 37t
    • 2 – 40t
    • 1 – sprocket carrier (for stock wheel)
    • 25 – sprocket carrier bolts
    • 1 – Left Side Engine case
    • 1 – Clutch Basket lock nut
    • 1 – Cylinder base gasket
    • Over 50 New engine parts still in bags (see Picture #6 & #7)
    • 1 Set spare wheels with rotors
    • 1 set 95% good rain tires
    • 1 set brand new Bridgestone Supersoft Slicks
    • 1 set Bickle Tire Warmers (used 3 race weekends)

    Asking $6000.00 US and I will pay the shipping to any any US state, excluding Hawaii.
    If you would like pictres or more info, please send request to [email protected]
     
  2. RACER JIM

    RACER JIM Well-Known Member

    would you trade for a 2002 yamaha r1
     
  3. RACER JIM

    RACER JIM Well-Known Member

    what state are you located in
     
  4. Olay

    Olay Well-Known Member

  5. jyamr1

    jyamr1 Member

    where are you located?
    any pictures?
    very interested for my eleven year old son.
    thanks jacques
     

Share This Page