MINT condition and fully prepped 2008 R6 Track Bike, ONLY 1200 miles and not a scratch on it. Extremely clean and wired (haven't done the wiring on the caliper bolts and lower fork leg bolts - but they are drilled). It needs absolutely nothing Clean and clear title too (something not many have) ATL area - 1200 miles with 5 angle valve seat job and thinner head gasket - Dynoed @ 118.6 on 93 pump (Shell premium) 8/2016 Sharkskinz Bodywork - professionally painted and looks as good as factory! Penske Triple rear shock (550 & 600 lb spring as spare) refreshed by TMAN on 9/2016 Ohlins 20 Mil kit forks (.975) refreshed by TMAN on 9/2016 Full Ti - Graves Exhaust Block off Plates PCV & QS Flashed ECU Graves Rearsets (GP shift) Scotts Damper Vortex Clipons SS Brake lines with EPFA EBC pads Ballistic Batt New OEM air filter with snorkel removed Fully serviced and tuned - I did this because the bike had such low miles and sat for a while so I wanted it 100% Steering head bearings repacked (greased), inspected and torqued All other bearings inspected/serviced/greased New spark plugs (OEM NGK) Replaced watter wetter with Engine ICE Injectors ultrasonically cleaned by Melka Fuel system cleaner New air filter Coils inspected and tested Brake fluid changed (Motul) Fresh oil change etc... Dyno'd @ 118.6 (8/2016) Pump 93 Bike has some of the OEM spares (clip ons, rearsets) $8800 with spare complete wheels. Don't want the wheels? we can work out a less expensive price Nekket.. None of this please!!
Can't edit anymore but I forgot to add.. OBSO (Or Best Serious Offer) I have pictures of the Original bodywork (Yellow) that was immaculate. An 08 this clean with this low mileage is hard to find.
Wow Juan.... Cant believe your changing up.... Whats in the future... Bump for a very very nice R6....
Can you believe it?? LOL.. New R6 (2017) or maybe a Grom and a twin of some sort or ??? Not sure yet bud..
This is a very benign build for a bit of extra power but not to sacrifice longevity. Roughly 600 track day miles on the "work" (may be high on that estimate bit have to look at paperwork.) Possible deal pending....