Kawasaki zx10r gen4 to gen5 rotor spacers

In order to use 2011 to 2015 front wheels on the 2016 bike, you need to space the rotors out slightly, and also use 2016 wheel spacers. Once you've done this, 2011-2015 wheels are a straight bolt on.





It will likely be much easier to find 2011-2015 wheels than 2016s as spares, so I have built 10 sets of rotor spacers specifically for this.



I have also built captive spacers for the 2016 wheels and 2011-2015 wheels for fitment on the 2016 bike. these captive spacers will NOT work on the 2011-2015 bike.



The rotor spacers can be seen here.









and here are the captive wheel spacers













Prices are as follows



The rotor spacers are 50 USD per pair shipped anywhere in Canada and the USA



To fit your 2011-2015 wheels to the 2016, you ONLY need these rotor spacers and the stock wheel spacers from your 2016 bike. if you don't want to swap spacers between wheels, you can either purchase a set of stock 2016 spacers from the dealer, or purchase a set of captive spacers from me.





The captive wheels spacers are 40 USD per pair shipped anywhere in Canada and the USA



These are captive spacers for the 2016. They can be used in 2011-2015 wheels when fitting the wheels to a 2016 bike.







The rotor spacers and captive spacers combined in a kit are 80 USD shipped anywhere in Canada and the USA







If you are interested in either rotor spacers, captive spacers, or both, please send an email to [email protected] to arrange for the purchase.





Thanks

 

pics of them fitted and a discussion can be found here

http://www.zx-10r.net/forum/f25/gen-4-front-wheel-gen-5-kit-315217-2.html

 

nobody upgrading from the gen4 to gen5?

 

back up. still have some of these left

 

Have any available now? Ready to buy if you do...

 

yeah i still have some of these left. send an email to the address in the original post and we will get you sorted out

thanks!

 

Pm sent wibbly

 

FWIW, I ordered, received and have used these and they work perfectly! Thanks Wibbly...

Now if I can just find some 330mm rotors for it I'll be all set!

 

thanks for the free bumps guys.

still have some of these left. just working on getting some more captive spacers turned up

 

Just bumping this.

I've recently seen some more interest in these so I'm producing more of the rotor spacers.

Please email me if you are interested

 

I have rotor spacers available again.

Email if interested

 

still available if anyone is doing the conversion

 

i did another run of these, email if interested

 

I'm interested in purchasing a set of those spacers for zx10r gen 4 to Gen 5 Wheels can you shoot me info so i can buy it paulrico87@ gmail.com

 

I have good set of Gen 4 zx10r wheels for sale

Sent from my SM-N950U using Tapatalk

 

i have a friend looking for a set of these, any available?

 

Yep I still have some ready to ship. Send an email to [email protected]

 

Are you still making these?

 

sorry, no. the ones i made took 3 years to sell. i'm not really willing to do that all over again. i should delete this post.

 

I have a set of these if anyone is looking.