Yamaha FZR suspension dog bones

Discussion in 'WERA Vintage' started by evakat, Sep 13, 2020.

  1. evakat

    evakat Well-Known Member

    In need of some custom length shock dog bones for my FZR750RT.
    My stock ones are 147mm...
    Looking for some in the 134mm to 140mm
     
  2. TurboBlew

    TurboBlew Registers Abusers

    eye to eye? Straight link? bolt hole size? 14mm? 17mm?
     
  3. britx303

    britx303 C.Thomas is Monica!!

    Are they the same as the 400 and 600’s? I have various ones from over the years for 400/600’s. The bores are 15/32” for them as well.........what are the 750’s? If I have bones that’ll work for you, I will send them ASAP. Also, the dimensions are centerline, I’m assuming?
     
    evakat and TurboBlew like this.
  4. evakat

    evakat Well-Known Member

    Mine are...
    My stock ones are... 147mm eye-eye.
    12mm hole size.
     
  5. evakat

    evakat Well-Known Member

    They are same as the 400...
    Let me know what lengths you have and I will pay your for them.
     
  6. britx303

    britx303 C.Thomas is Monica!!

    Gotcha. I’m going to go through in a bit to see what I’ve got.
     
    evakat likes this.
  7. britx303

    britx303 C.Thomas is Monica!!

    The only set besides stock are 130mm centerline bore-bore. Let me know if you want them and I can ship them tomorrow. I’m out of stock bar to make new ones. Wanted just to make 2 sets per your dimensions so you can find what works. Are you trying to get it ready ASAP for a track outing? If you have a little time I can get the material this week and punch out a couple sets of different CL’s
     
    evakat likes this.
  8. evakat

    evakat Well-Known Member

    I am want to raise the rear about 1"-2".
    I missed my track time for this weekend...
    Shooting for the next track day on the 1st of October.
    I will definitely take the 130mm.
    If you can make some others... I would love to have 135mm. 140mm. 145mm.
     

Share This Page