I have three wheels, two Gen 2 fronts (one silver, one black) and one rear (black) for sale. Rear is for a Gen 1. $50 each. All are from a track bike, all straight. All come with rotors, spacers, and/or cush. No sprockets or tires, but do have several sets of take offs and a couple sprockets still for sale. Email for high res pictures, if interested. For a highly tuned race bike, how much tighter than OEM spec are up to the racer. There's probably good info on the web as to what can be felt and what can't. Suzuki OEM specs for straightness are: 0.012" total runout for brake rotors, for both front and rear. 0.080" total wheel rim runout (front and rear) So you can see these are all better than OEM spec. Rear wheel, Gen 1 with 17mm axle bore Note: Wheel does not come with the spacer between cush drive and wheel bearings!! Buyer will need to source! Right side rim: 0.005" Left side rim: 0.003" brake rotor: 0.002" I only have one spacer for the front, so the first buyer gets it, if that's a big deal for you. Front wheel #1 (black, with straightening marks), Gen 2 with 17mm axle bore Non-spacer side rim: 0.019" Spacer side rim: 0.012" Non-spacer side rotor: 0.007" Spacer side rotor: 0.006" Front wheel #2 (silver, pretty good shape), Gen 2 with 17mm axle bore Non-spacer side rim: 0.012" Spacer side rim: 0.006" Non-spacer side rotor: 0.003" Spacer side rotor: 0.006" Shipping will be additional for a 20x20x8" @ 21 lbs box for fronts or 20x20x10" box for rears weighing 23 lbs going from zip 15061.
