SV gauges

I am going to be using Cheetah plastics with a graves bracket. I would like to know if anyone is doing the same and what you all would suggest on using as far as a Tach and Temp gauges.

 

ANYONE?

 

Sorry, we have sharkskin bodywork and a gp bracket.

 

Sorry, I've got no bodywork, no gages!

 

dont worry about the guages, put a shift light and dummy light for the temp., thats all you need.

 

Dummy light...what are u trying to say?

 

An idiot light to replace the stock one. Radio Shack sells red, blue and green 12VDC ones for about $1.50/2 pk. You drill the correct sized hole somewhere dashlike to mount it and it snaps in place. Borrow a wire crimper kit, get some heat shrink tubing and you're done.

I did the radio Shack thing for the oil light but also added a Daytona temp gauge I got from Marmo.

 

Anything will fit with the right hammer.

Don't worry too much about it. Mount everything up, then fit the tach to the room that remains.

120
119
118
117
116
115
114
113
112
111
110
109
108
107