Hi, I'm looking for a nice straight and complete front end for an fzr 400 for a project build. Hoping someone here might be able to help.
Location?? 400 specific? I’ve got a spare set of 600 forks. You’ll need matching rotors or I have a set of 400 lower sliders if you are keeping it 88-89 specific brakewise
Located in Ontario, Canada. I'm looking more for a complete front end including axle, triples, front fender as a takeoff. Not sure what the difference is between 400 and 600.
The bike I want to use these forks on is actually an 82 rd 350 lc so nothing is especially specific. I measured up a friend's fzr 400 and the front end looked like it would work fairly well.
Check the steering head bearing part numbers. Matching upper and lower bearings means an increased chance of bolting straight up ...
Thanks for the reply. I was going to machine a new stem for the conversion as I know the fzr stem is not going to be compatible and I do have a lathe and mill.
I have a tx500 front hub that I will lace to a 17x3.15 excel rim with dual discs and an rd350 b rear hub laced to a 17x4.5 rim with the drum brake. Should give the bike a bit of a tz vibe with better tires, steering and brakes. Lots of bits to machine...
I have 400 and 600 complete front ends ( not bent). Possibly more bits depending on your interest. I am in B.C. and will pm you my number.
