Foot peg sliders

What do you guys use for sliders? I've heard of skateboard wheels or axle spacers being used. I bought a set from UFO, but would love to entertain other options

 

I bought a long chunk of 1.5" diameter UHMW rod and cut 1/2" thick slices, which I then fasten to the foot pegs with screws or safety wire. I welded a little strap to the bottom of the foot peg and screwed the UHMW disk to it on an old YZ 80, that seemed to work ok.

 

I am a little nervous, I am doing a race in 2 weeks and want to make sure I have a good set up to pass tech

 

What bike is it?

 

I used chainsaw file holders. Ha. Got a bag of them for free

 

All you need is foot anchors

 

is this a tech requirement???

 

crf250r.

Yes - I thought so? Some tracks make you do it to save the asphalt.

 

If it works it works. As long as it's plastic and slides

 

You can buy some from toxic moto for $20 bucks if you don't want to spend time making them.

 

I had a bent left foot peg and got some UFO sliders. They did not fit too well, but I made them work. Tested them out at Bushnell and did not fall off.