Dunlop TT93 vs Mitas MC35

Discussion in 'Mini Racing' started by Ethan Wakefield, Jul 10, 2019 at 12:41 PM.

  1. Ethan Wakefield

    Ethan Wakefield Active Member

    Anyone had experience on both? My MC35s are about shot and was thinking about trying the Dunlops. I'm on a CRF150R by the way.

  2. nsouza707

    nsouza707 Well-Known Member

    I'm on a stock motor Grom and have experience on both. Mitas have a bit more grip, but the Dunlops are wearing better and are more predictable.
  3. Ethan Wakefield

    Ethan Wakefield Active Member

    Cool, I've ridden a grom with the dunlops and really liked them. Do you think you pace is relatively the same?
  4. nsouza707

    nsouza707 Well-Known Member

    ...well I'm faster now than when I last used a Mitas, but I'm confident I could run the same pace on either tire. The Dunlop, in my opinion, is more predictable. It definitely wears a lot better than the Mitas.
    Ethan Wakefield likes this.
  5. D-Zum

    D-Zum Alex’s Crew Chief

    I've not ridden any Mitas tires, but I've been very pleased with the TT93's on my Grom.
  6. sdiver

    sdiver Well-Known Member

    Putting Mitas on mine today after racing TT93 last year. What cold pressures do you recommend for hot, dry track? TT93 I usually ran between 17-18 cold. I've heard 24 might be a good starting point? On a Z125.
  7. Ethan Wakefield

    Ethan Wakefield Active Member

    On the 150r with a soft front and medium rear I would start at 20-20
    sdiver likes this.
  8. sharky nrk

    sharky nrk Rubber Side Up

    I always ran around 17 psi cold f/r to get around 19 hot on my Grom
  9. nsouza707

    nsouza707 Well-Known Member

    This is what I ran. Helped with the tearing I was getting.
  10. ekraft84

    ekraft84 Registered User

    On the 50, liked Mitas and PMT's better than the 92/93's. YRMV.

Share This Page