We're having a track day on April 27th at cmp on the kart track. there isn't a wera race that weekend so i hope some of you will come out and ride! here are our tech regs and prices. we also have an insurance required minimum rider age of 7. track opens at 8:00 and closes at 7:00 tech starts at 8:30. the kart track goes hot at 9:00 until 5:00 we may have to rotate with karts.they will run 20:00 min sessions as will we. the track has a quite hour from 11:00 am till 12:00 pm fees. there is a 5 dollar entry fee for any over 12. its 60.00 a adult rider 40.00 for a child rider with a paying adult. its 10.00 per rider for insurance. we collect the insurance and give out the wrist bands not the track. insurance wrist bands are required for access to hot pit. we will run two classes. kids/adult novice under 125cc 4 stroke/ mini bikes supermoto. cmp has a paddock helmet rule for all children riders. kickstands removed. safety wire the oil drain plug and fill cap and radiator fill cap. footpeg sliders, barend sliders, and axle sliders are required. Remove mirrors No leaking fluids or loose parts. Catch can for coolant, fuel if carb'd, and crank case can or vented to airbox (Most street legal bikes are vented to intake, anyway) Tape up lights. Water+Waterwetter or Engine Ice for coolant Tech rules may be subject to change in the future as needed These tech reqs are for the kids class and novice adult riders for their first two times at our events. after those events riders will be required to meet the standard tech requirements. Tech Requirements: Remove mirrors No leaking fluids Catch can for coolant, fuel if carb'd, and crank case can or vented to airbox (Most street legal bikes are vented to intake, anyway) Tape up lights. Water+Waterwetter or Engine Ice for coolant Sliders not required but encouraged Tech rules may be subject to change in the future as needed. Gear Requirements: a snell2005/2010 or ece 2205 helmet is required. a impact rig with knee pads under mx pants, boots, gloves, and a helmet should be considered the minimum gear required, with leathers or MX gear with pad/braces and a compression suit with MX or roadrace boots being ideal. *Hard back protector STRONGLY encouraged* Nobody wants to get hurt and ride away in an ambulance, it will ruin your day/week/year if there are any questions or i forgot anything please let me know through the face book page. or my email is [email protected]
Axle sliders I used skateboard wheels off ebay. Drilled holes in the end of the axle bolts and tapped them. Worked great. Pegs. I went to walmart got a plastic cutting board made from derlin. Took it home traced the peg and cut it out. When I held it to the peg after I cut it out I would slide toward me so there was over hang, took a heat gun,heated up the derlin and curved it up over the front of the peg and drilled little holes and safety wired it to the pegged.It worked really good. I did have to wire on back on after a nasty crash but other then that it was awsome.
There is a guy on the vir supermoto page making really nice pay sliders if you're interested. Draggin that sounds cool do you have any pics of how it turned out?