2nd gen SV650 Quick Change?

Discussion in 'Tech' started by Crconnor18, Feb 8, 2021.

  1. Crconnor18

    Crconnor18 Well-Known Member

    I’m toying around with the idea of putting something together to see if it’s possible.

    I’m not looking to break records as I’m still a slow AM rider but more so something to keep me busy while the snow melts up here. I’m too slow & my bike definitely isn’t considered “fast” but I like to learn.

    I do have Zoran’s captive spacers which helps but would love to see if there is something I can do that makes things easier.

    I’m running the stock rear wheel as well.
    Any sneaky tricks?
     
  2. SLLaffoon

    SLLaffoon Well-Known Member

    I'm assuming you mean rear? I had a somewhat simple setup on one of my SVs that I got second hand. It required three parts, as well as a slightly shorter spacer on the caliper side of the wheel. The front was a little different, and I had a 1st gen R6 front anyway.

    New axle
    Threaded cylinder through the caliper bracket
    Captive plate that attached to the cylinder on the other side of the caliper bracket.

    IMG_2421-1.jpg IMG_2422-1.jpg
     

Share This Page