This is not an easy sale for me, what you see here is a zero hour new bike with potentially one track day on it (maybe) some of the parts on the bike: Full Lacomoto racing body work (painted by SBK paints in San Diego) Spears everything Vortex rear sets Ohlins rear shock Ohlins AK front cartridges Spark full exhaust Built for MA and could roll up and past any tech inspection Also all the spares you will need minus an extra set of wheels please PM if you are interested and we can discuss pricing and the details
Yes, but if you profile pics denotes anything than you should understand the cost to build and put a bike together.....
Since I know most are in the start of their seasons and not typically looking for a bike and the feedback I am getting back from friends I will let this bike go for 10700.00 but that is low as I will go! it is a zero time on it machine with a great build and if it does not sell I will just pull it and race it.
It might help to list the spares packages in detail etc. Also, given the MA build reference and if its relevant, who built the bike, any motor work etc. Also - more pictures. Close ups of upgrades (hard parts, etc). It's been my experience -More information is always better. GLWS
Definitely need a lot more detail in this ad for a $10k Ninja 400. Not saying it's not worth it by any stretch, but if you're wanting top dollar, the salesman in me says people need to know all the info.
Thanks for the feedback here is the information I have for the build: Frontline MotoAmerica Ninja 400 / New - Built from brand new zero mile bike / Clear title (2018) - Only has one day at Roebling plus dyno time at Quarterly's - Quarterly Racing: -engine build / tune (built to same spec as team racebikes) -block off plate - vortex rearsets -steering stop -suspension geometry -MA restrictor plates - Spark Exhaust - FTECU quick shifter - Ohlins suspension / steering damper - 415 drive DID ERZ Gold chain, Spears Alum sprocket - Brake Tech Front brake caliper - Graves Captive spacers - Graves carbon shark guard - Woodcraft clip-ons - Woodcraft sliders - Domino Throttle w/ adj cam inserts - CRG levers - Woodcraft lever guards - BG Engine covers - Brembo braided brake line - Veshrah ZZ pads - Halo gas cap - Lacomoto bodywork - Sharkskinz tail section, works with stock seat or super bike seat, both included as spares - Cox radiator guard - tank foam - MA rain light - Captive rear brake caliper - Captive rear wheel adjusters - Spares include: - oem factory service manual - oem clutch - oem oil filters - Bars - Footpegs - Spears Alum sprockets 50-57 - Front sprockets 17/18 - 2 chains 1 new - numerous rivet link 415 master links - complete set of Graves captive spacers - 90 deg valve stems (4x) Bike was stripped to bare frame so all bearings could be cleaned, greased and properly set. Numerous other mods for perf and ease of service etc…. Ready to win races!
