Has anyone ran into this where the actual knuckle is stuck in the frame? The dog bones came off just fine and the bolt that goes through the frame/knuckle came out but the knuckle won’t budge. Curious if anyone has ran into this and what the solution was.
the inner race captures that part to the frame. you need to pull that race out, you can see it from the LHS if you have the bolt out. sometimes its in there good. with some inside snap ring pliers you can gently grip the inside of the race from the left and wobble/rotate it to get it moving and then grab the edge when enough race is exposed with some pliers or something and pull.
