1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2008 Triumph 675 Racebike Part out

Discussion in 'Parts for Sale' started by vosnick52, Jul 11, 2010.

  1. vosnick52

    vosnick52 Well-Known Member

  2. TakeItApart

    TakeItApart Oops!

    I sent you one as well, waiting for email to send payment. ;)
     
  3. louie3

    louie3 Member

    what condition is the radiator in? thanks

    louie
     
  4. shadowray

    shadowray New Member

    PM sent

    PM sent ...
     
  5. talisman

    talisman New Member

    PM sent
     
  6. TakeItApart

    TakeItApart Oops!

    FYI, you may get some hits from the guys over on triumph675.net, one of your buddies linked us in there.
     
  7. VOID

    VOID New Member

    still got the race wheels? Sending PM.
     
  8. CATSNOX900

    CATSNOX900 Active Member

    I want your 25mil kit but I just purchase a set of body work. Damit why are all the parts that I need so damn expensive haha. What color is your GPR and is it the V1 or V2?
     
  9. vosnick52

    vosnick52 Well-Known Member

    The bike is in my garage and taking parts off to get pics.
    The radiator is perfect and the gpr is black.all u have to do is bolt the 25mil kit forks on and go.
     
  10. vosnick52

    vosnick52 Well-Known Member

    The bike is now down to the bare frame.
    Keep the interest rolling :up:
     
  11. vosnick52

    vosnick52 Well-Known Member

    * clean title/mso frame a couple of dings $1500
    * gauges with 3500 miles $300
    * snorkel (new) $100
    * stock stay (useable and on the bike) $75
    * air box with BMC filter $100
    * Injectors $150
    * Ohlins 25 mil kit forks (1.0 springs) $1000
    * Forks with Ohlins piston kit (1.0 springs) $600
    * Ohlins TTX shock (1.1 spring) $750
    * Arrow full ti exhaust stage 2 (perfect condition) $1200
    * motor parts (kit cam tensioner, bottom end, trans, etc.) make offer
    * armour bodies bodywork (a little rashed but still looks good) $400
    * stock tank with fuel pump (has a little ding) $400
    * GPR stabilizer (black) $250
    * woodcraft-- clip-ons $100 rear sets $250 with new extra pieces, case covers $250 L&R
    * front calipers with braided lines $80
    * rear caliper with braided line $50
    * kit manual cam chain tensioner $70
    * Kit ecu & kit harness $500
    * slipper clutch (used) $600
    * PC3 usb $200
    * Dynojet QS (reverse shift) $200
    * CRG adjustable folding levers (clutch & brake with some rash) $50
    * Lightech gas cap $100
    * Euro racing quick turn throttle $100
    * stock wheels with rotors (copper) $600
    * triumph race wheels with rotors (white) SOLD
    * subframe (new) $350
    * swingarm (new) $350
    * subframe (used $200
    * swingarm (used) $150
    * CRG adjustable folding levers (1 set new $200) (1 set used $75) SOLD
    * Catalyst Composite bodywork with new AB tail (used but with new paint) ($550)
    * STM slipper clutch (new) $700
    * Triumph 1050 throttle tube and cables $75
    * vortex sprockets front -- 15,17 ($30) rear-- 40-48 some are new $150 for all)
    * rear spools (new) $20 SOLD
    * K&N oil filter $10
    * riders seat X2 $50 each
    * woodcraft frame sliders (new) $40
    * woodcraft shark gaurd (new) $40
    * stock ECU and harness $300
     
  12. Dirty675

    Dirty675 Member

    What brand is the used slipper clutch...
     
  13. vosnick52

    vosnick52 Well-Known Member

    STM
     
  14. vosnick52

    vosnick52 Well-Known Member

    This is for everyone who has sent me a pm.
    There are a ton of pm's so I am going in order of the pm sent and sending pics. I have been on the road so it is hard to reply and send pics but this weekend all my pm's will be replied to.
    Thank you for your patience.
     
  15. TakeItApart

    TakeItApart Oops!

    Bump and a heads up! If you still have some parts left a little later on, I may be interested. I just have a lot of purchases going on at the moment.
     
  16. MGFChapin

    MGFChapin Well-Known Member

    Master cylinder or extra bleeders for it?
     
  17. vosnick52

    vosnick52 Well-Known Member

    clean title/mso frame a couple of dings $1500
    * gauges with 3500 miles $300
    * snorkel (new) $100
    * stock stay (useable and on the bike) $75
    * air box with BMC filter $100
    * Injectors $150
    * Ohlins 25 mil kit forks (1.0 springs) $1000
    * Forks with Ohlins piston kit (1.0 springs) $600
    * Ohlins TTX shock (1.1 spring) $750
    * Arrow full ti exhaust stage 2 (perfect condition) $1200
    * motor parts (kit cam tensioner, bottom end, trans, etc.) make offer
    * armour bodies bodywork (a little rashed but still looks good) $400
    * stock tank with fuel pump (has a little ding) $400
    * GPR stabilizer (black) $250
    * woodcraft-- clip-ons $100 rear sets $250 SOLD with new extra pieces, case covers $250 L&R
    * front calipers with braided lines $80
    * rear caliper with braided line $50
    * kit manual cam chain tensioner $70
    * Kit ecu & kit harness $500
    * slipper clutch (used) $600
    * PC3 usb $200
    * Dynojet QS (reverse shift) $200
    * CRG adjustable folding levers (clutch & brake with some rash) $50 SOLD
    * Lightech gas cap $100
    * Euro racing quick turn throttle $100 SOLD
    * stock wheels with rotors (copper) $600
    * triumph race wheels with rotors (white) SOLD
    * subframe (new) $350
    * swingarm (new) $350
    * subframe (used $200
    * swingarm (used) $150
    * CRG adjustable folding levers (1 set new $200) (1 set used $75) SOLD
    * Catalyst Composite bodywork with new AB tail (used but with new paint) ($550)
    * STM slipper clutch (new) $700
    * Triumph 1050 throttle tube and cables $75
    * vortex sprockets front -- 15,17 ($30) rear-- 40-48 some are new $150 for all)
    * rear spools (new) $20 SOLD
    * K&N oil filter $10
    * riders seat X2 $50 each
    * woodcraft frame sliders (new) $40
    * woodcraft shark gaurd (new) $40
    * stock ECU and harness $300
     
  18. vosnick52

    vosnick52 Well-Known Member

    I also have kit triumph velocity stacks, used 2 races. $250
    I also have a good bottom end of a motor with kit oil pump gear, kit cam chain tensioner,etc.
     
  19. vosnick52

    vosnick52 Well-Known Member

    I also have kit triumph velocity stacks, used 2 races. $250
    I also have a good bottom end of a motor with kit oil pump gear, kit cam chain tensioner,etc.
     
  20. vosnick52

    vosnick52 Well-Known Member

    The gpr is a V1
     

Share This Page