1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2007 Lark 7x14 trailer

Discussion in 'Other' started by Thunderace, Jul 9, 2018.

  1. Thunderace

    Thunderace Well-Known Member

    I have a 2007 Lark 7x14 trailer for sale. Here are the specifics:
    • Mounted fold down bed/couch
    • Finished interior with carpeted floor
    • Interior height is just under 6 feet
    • Exterior outlet for hooking up to 110 power or generator
    • Interior outlet
    • 4' LED shop light inside with switch
    • Additional ceiling light powered by tow vehicle
    • Additional battery powered light above side door
    • Roof vent
    • Insulated side walls and ceiling
    • Fiberglass sheeting on ceiling
    • Gladiator Storage system on driver side wall
    • Two hanging baskets and two hooks for Gladiator system
    • Three small hooks for hanging items on passenger side wall
    • Two upper storage cabinets mounted in nose
    • One lower set of drawers mounted in nose
    • E-rail mounted on multiple walls
    • Handles mounted on door for tie downs
    • Shoe bag rack on wall for supplies
    • Pit-Bull TRS plate (picture has latches shown but not included)
    • Homemade TRS-type restraint (I use Pit-Bull pins in restraint)
    • Three D-Ring mounts for hauling third bike
    • Marine grade 3/4 inch plastic board extension on ramp door
    • Upgraded LED turn/brake lights
    • Two full size spares mounted on tongue
    • Camper style side door with lockable door latch
    • Rubber socket style latch to keep door open
    • Receiver mounted under side door for tire changes
    • Tandem axles
    • Hand crank tongue jack (new ~2015)
    • Electric brakes (replaced fall of 2016)
    • New wheels and tires (replaced fall of 2016)
    • Had a flat and one tire will be brand new
    • New safety chains (replaced 2018)
    • 24" diamond plate aluminum stone guard on nose
    • New leaf springs and shackles (replaced fall of 2016)
    • All the decals are vinyl and can easily be removed with a heat gun
    • Clear title
    This has been a really nice trailer for me since I bought it from another member in 2009 I believe. I made a lot of improvements since I purchased it and it needs nothing but another tow vehicle. It requires a 2 5/16" ball in the receiver. I will include a ball and your choice of receiver. I have multiple receivers from 2" drop to 7". I would be willing to help transport the trailer a reasonable distance, if needed.

    I hate haggling over the price, so I am using the CarMax method of pricing and setting it at $2,600. If you like the price, great. If you don't, that's fine too. It's a great trailer with a ton of extras that would cost well over $1000 to outfit another trailer. You can reach me through PM, email mmmkay @ verizon dot net, or text at 410 456 2495.

    Lark01.jpg
    Lark02.jpg Lark03.jpg
    Lark04.jpg
     
  2. Thunderace

    Thunderace Well-Known Member

  3. Thunderace

    Thunderace Well-Known Member

  4. Thunderace

    Thunderace Well-Known Member

    Lark14.jpg
    Lark15.jpg
    Lark16.jpg
    Lark17.jpg
    Lark18.jpg
     
    Seif J likes this.
  5. Seif J

    Seif J Active Member

    If I only had the money, a bike, and skill I would have bought it. But sadly not yet....soon.
     
  6. ChemGuy

    ChemGuy Harden The F%@# Up!

    Location???
     
  7. Thunderace

    Thunderace Well-Known Member

    It's in my signature, but I should have stated it in the description. I am just south of Baltimore, MD near BWI airport.
     
  8. ChemGuy

    ChemGuy Harden The F%@# Up!

    Thanks.
    I just saw that on the computer. Didnt see that on my phone.

    Plan on coming west anytime soon?
     
  9. Thunderace

    Thunderace Well-Known Member

    Unfortunately no. I now have a toyhauler and plan to use it from this point on.
     
  10. Stealth22

    Stealth22 Member

    Is the price negotiable?
     
  11. Thunderace

    Thunderace Well-Known Member

    Sale pending...….
     
  12. Wheel Bearing

    Wheel Bearing Professional low sider

    Reading is fundamental.
     
    triplestrong, Phl218 and Shenanigans like this.
  13. nlzmo400r

    nlzmo400r Well-Known Member

    Hate to clog this thread, but were you towing this with a half ton pickup? Curious how something of this size would do behind a 1/2ton truck.
     
  14. TLR67

    TLR67 Well-Known Member

    Should
    should be fine... I pulled my 8.5 X 20 with a small 4.8 in a half Ton loaded with 3 bikes and gear....... Needed to upgrade for the Hills ect but it pulled it ok....
     
  15. Thunderace

    Thunderace Well-Known Member

    I had a single axle 6x10 v-nose that I pulled with a HEMI Ram 1/2 ton. This trailer is a little shorter with a flat nose and pulled easier than the 6x10. The dual axles and slightly lower height make all the difference. Surprisingly, the v-nose was not as important. I moved to a Ram 2500 with a Cummins engine and it was a joke pulling the 7x14. I knew I wanted to get a toyhauler, so the diesel was just foresight.
     
  16. Waterboy

    Waterboy Rain Man

    Damn, if sale wasn't pending, i'd consider buying it back being the original owner and all :)
     
  17. Thunderace

    Thunderace Well-Known Member

    Sorry Greg, I wasn't aware you were in the market. If I had known, I would have given you first crack at it. As it stands now, the trailer is SOLD and on it's way to it's new home.
     

Share This Page