1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2007-2012 CBR600RR Race Bike Part Out

Discussion in 'Parts for Sale' started by Peter Allison, May 17, 2017.

  1. Peter Allison

    Peter Allison Member

    I am switching models this season and have the following parts from my 2008 CBR600RR Race Bike available. All parts are in excellent condition, the suspension in particular has had very little use. Bitubo is a great product and I will be getting it again for my new bike.

    Please note that I am in New Zealand. All prices are listed in USD and are + paypal fees and + postage.

    - Bitubo ECH29 cartridges with 9.0N/mm springs (new Jul 2016) $1,200
    - Bitubo XXF31 shock with 100N/mm spring (new Jul 2016) $1,200
    - Accossato 19x18 master cylinder with folding lever (new Apr 2016) $150
    - Wheel set (front and rear) with rotors (no cush drive) $550
    - Yoyodyne slipper clutch, spare new unused spider spring included $400
    - GPR Steering Damper $200
    - Lightech rearsets $150 (no gear lever)
    - HRC ECU (15,800rpm rev limit), HRC full wiring loom, HRC cams (inc adjustable HRC sensor pickup) $600
    - HRP Velocity Stacks (aluminium, short) $100
    - Power Commander V, fuel module, auto tune $300
    - Power Commander III $150
    - Woodcraft engine covers, lots of additional replacement pucks $150
    - Rear shock springs (115N/mm, 125N/mm, priced each) $120
    - Front springs (9.0N/mm, 9.5N/mm, priced for the pair) $100

    I am happy to switch out the shock spring for one of another rate if desired.
    No photos of Yoyodyne slipper clutch or HRC cams as they are still in the motor, but happy to provide photos prior to shipment if requested. _DSF9237.JPG _DSF9238.JPG _DSF9239.JPG _DSF9240.JPG _DSF9241.JPG _DSF9242.JPG _DSF9243.JPG _DSF9244.JPG _DSF9245.JPG _DSF9246.JPG
     
  2. fahed

    fahed Member

    Does the slipper clutch fit the 2015 cbr600rr? If yes I'll buy
     
  3. Peter Allison

    Peter Allison Member

    Hi, 99% sure but would prefer you to do own research as I wouldn't want to be responsible - the current motor in my bike is a 2013 so if the 2013 is the same as 2015 I'd say yes.

    EDIT: Looks like it's the same for all years 2007+ http://www.yoyodyneti.com/product-p/t16703.htm
     

    Attached Files:

  4. Hurd

    Hurd Active Member

    I'm interested in the slipper clutch too.
     
    len36nox likes this.
  5. Krypt RR

    Krypt RR Well-Known Member

    Pics of the hrc ecu?
     
  6. Peter Allison

    Peter Allison Member

  7. Peter Allison

    Peter Allison Member

    HRC ECU, Loom and Cams SOLD
     
  8. HEZ

    HEZ Member

    Pm sent...master cylinder still for sale? Thanks
     
  9. SetUpSixRR

    SetUpSixRR Well-Known Member

    Pm incoming for a bunch of parts
     
  10. Peter Allison

    Peter Allison Member

    Note: I've had to shoot away for the weekend on short notice - send in your PM's, I'll reserve your spot for parts on a first in first served basis and get back to you all on Tuesday. Currently HRC gear is sold, 3 people in the queue for the slipper, GPR 1 in queue, PCV 1 in queue, Accossato m/c 1 in queue. Thanks guys.
     
  11. Peter Allison

    Peter Allison Member

    GPR steering damper and Velocity Stacks SOLD
     
  12. Peter Allison

    Peter Allison Member

    List updated, price drop on suspension:

    - Bitubo ECH29 cartridges with 9.0N/mm springs (new Jul 2016) $1000
    - Bitubo XXF31 shock with 100N/mm spring (new Jul 2016) $1000
    - Accossato 19x18 master cylinder with folding lever (new Apr 2016) $150
    - Wheel set (front and rear) with rotors (no cush drive) $550
    - Lightech rearsets $150 (no gear lever)
    - Power Commander V, fuel module, auto tune $300
    - Power Commander III $150
    - Woodcraft engine covers, lots of additional replacement pucks $150
    - Rear shock springs (115N/mm, 125N/mm, priced each) $120
    - Front springs (9.0N/mm, 9.5N/mm, priced for the pair) $100
     
  13. François

    François Well-Known Member

    Is it pcv and auto tune only or the ignition fuel module apart of it?
     
  14. Peter Allison

    Peter Allison Member

    Hi, all 3 items (PCV, Secondary fuel module and Autotune) are included, I do not have the ignition module. I can also include the 02 sensor for the Autotune at no additional cost.
     
  15. Peter Allison

    Peter Allison Member

    Accossato m/c SOLD - List updated, further price drop on suspension:

    - Bitubo ECH29 cartridges with 9.0N/mm springs (new Jul 2016) $900
    - Bitubo XXF31 shock with 100N/mm spring (new Jul 2016) $900
    - Wheel set (front and rear) with rotors (no cush drive) $550
    - Lightech rearsets $150 (no gear lever)
    - Power Commander V, fuel module, auto tune $300
    - Power Commander III $150
    - Woodcraft engine covers, lots of additional replacement pucks $150
    - Rear shock springs (115N/mm, 125N/mm, priced each) $120
    - Front springs (9.0N/mm, 9.5N/mm, priced for the pair) $100
     
  16. Ready to pay for the slipper

    Sent from my XT1254 using Tapatalk
     
  17. Matt Smith

    Matt Smith New Member

    Front and rear suspension with all springs to US 27831 NC price PM would be grate if you could Sir.
     
  18. Peter Allison

    Peter Allison Member

    Replied via PM, thanks.
     
  19. Peter Allison

    Peter Allison Member

    Just the Bitubo cartridges, fork springs and shock springs left now. Price drop to clear:

    Bitubo ECH29 Cartridges $750
    Fork Springs $80pr
    Shock Springs $100ea

    Cheers!
     

Share This Page