https://imgur.com/a/bapn71b 4200 miles Setup for a 150 lb rider Sitting for 8 years, but all parts work Happy to provide closer photos of any item or answer any questions Located in San Diego, local pickup OK, will ship to lower 48 states - small items (ie clip-ons) $10, medium items (ie radiator) $20, large items (ie forks, gas tank) $30 - all prices obo - if no damage mentioned, part is in great condition Airbox 20 PC3 50-100 Air Ducts 20 Seat, OEM 40 Hindle Highmount Exhaust 200 slight dent at mid exhaust piece Rear tray 50 small side piece intentionally cut Subframe 50 cracks on the rear, but straight bolt is broken off in one of the thread inserts for seat Rear Shock - Revalved 40 Vortex Clip Ons 50mm 40 Edge of a bar slightly ground down Scotts Damper - Rebuilt by Scotts (face plate was damaged in a crash) 100 Front Forks - Possible 20 mm Ohlins Kit 300 *exchanged forks with trusted WERA member, never checked internals, but it felt much better than my revalved OEM forks; too lazy to disassemble forks so will only guarantee OEM internals Sato Racing Adjustable Rearsets w/ spares 100 One footpeg edge ground down slightly, mismatching colors of plates Triple tree 50 top nut edges slightly stripped Cluster 4254 miles 80 small cracks on display, but fully functional Race fairing stay 50 Front Wheel + Front Rotors 150 Rear Wheel + Rear Rotor 100 Brembo Master Cylinder 19x18 100 Edge of brake lever ground down slightly -2 stainless steel front brake lines 60 Fuel Tank w/ Vortex Cap 70 Slight dent on top right Race Fairings w/ D-Rings, OEM Windscreen - Unknown Brand 150 Small hole in belly pan Regulator 10 Pit Bull stands w/ Axle Holders Front with various pins 150 Rear stand 125 LP racing rear stand 20 Swing arm 20
https://imgur.com/CqsdiDr You can have everything minus the swingarm, frame, engine, kickstand, and wiring harness for $1000 shipped.
Updated parts availability: Airbox 20 PC3 50-100 Air Ducts 20 Seat, OEM 40 Hindle Highmount Exhaust 200 slight dent at mid exhaust piece Rear tray 50 small side piece intentionally cut Subframe 50 cracks on the rear, but straight bolt is broken off in one of the thread inserts for seat Rear Shock - Revalved 40 Front Forks - Possible 20 mm Ohlins Kit 300 *exchanged forks with trusted WERA member, never checked internals, but it felt much better than my revalved OEM forks; too lazy to disassemble forks so will only guarantee OEM internals Triple tree 50 top nut edges slightly stripped Cluster 4254 miles 80 small cracks on display, but fully functional Race fairing stay 50 Front Wheel + Front Rotors 150 Rear Wheel + Rear Rotor 100 -1 stainless steel front brake lines 60 Fuel Tank w/ Vortex Cap 70 Slight dent on top right Race Fairings w/ D-Rings, OEM Windscreen - Unknown Brand 150 Small hole in belly pan Regulator 10 LP racing rear stand 20
https://imgur.com/a/3Co8B4u Updated, lowered prices, very motivated to clear my garage! obo me!: Seat, OEM 40 Hindle Highmount Exhaust 150 slight dent at mid exhaust piece Front Forks - Possible 20 mm Ohlins Kit 300 *exchanged forks with trusted WERA member, never checked internals, but it felt much better than my revalved OEM forks; too lazy to disassemble forks so will only guarantee OEM internals Triple tree 50 top nut edges slightly stripped Cluster 4254 miles 80 small cracks on display, but fully functional Race fairing stay40 Front Wheel + Front Rotors 100 Rear Wheel + Rear Rotor 100 -1 stainless steel front brake lines 50 Fuel Tank w/ Vortex Cap 50 Slight dent on top right
https://imgur.com/a/3Co8B4u Updated, lowered prices, very motivated to clear my garage! obo me!: Seat, OEM 40 Hindle Highmount Exhaust 150 slight dent at mid exhaust piece Triple tree 50 top nut edges slightly stripped Race fairing stay40 Front Wheel + Front Rotors 100 Rear Wheel + Rear Rotor 100 -1 stainless steel front brake lines 50 Fuel Tank w/ Vortex Cap 50 Slight dent on top right
