Hey all, I started selling my 07 CBR600RR racebike parts late last summer, and sold about half of it. Now that Spring is here, and I can actually get in my garage, I’m starting up the parts sale again for the rest of it. PM me up if anything here is of interest. Prices are the part, shipping is additional. I made an album with all the part pics, so you can browse them. I can also take more pics if something isn't showing up. https://beta.photobucket.com/u/fractal2k5/a/67bbccd4-de8e-4852-81da-e3d331efa7f8 https://beta.photobucket.com/u/fractal2k5/a/7451adf7-468a-4f08-bc11-bc4c44942067 Cheers, Darrel Cherry Former Utah MoM #18 ($750) Ohlins TTX rear shock ($250) GPR Steering Stabilizer ($250) Dynojet Ignition Module and Quickshifter (Push type) combo. $200/$100 separate. ($150) Accossato 19x18 Master Cylinder (like new) ($180) Woodcraft rearsets - Notice the pegs are cut down. I did this from the recommendation of a fellow racer, and it is way better than the stock length IMO. If you don’t like it you can always get new pegs to put back on. ($25) Stock Front Calipers, each ($120, $50) Woodcraft Engine covers - Small one has rash, but fully functional ($50) SPARE Vortex clip-ons - bar ends rashed ($25) Woodcraft frame sliders (some rash, but basically full height) ($10) Woodcraft Shark Fin (just the fin, no mounting hardware) ($120) SPARE Sato Racing Rearsets (can be used for standard or GP shift with the push quickshifter. Standard required the use of an extra pivot piece and 2 rods in the system) ($50 all) SPARE Multiple rear sprockets of different sizes (39, 41, 42, 42, 44 / 15 front) ($20) Front Sprocket Cover ($40) Stock ECU ($40) Modified wiring harness. This has been spliced and set up for various electronic mods ($25 ea) 2 rear cush drive ($100) Headlift Stand - not sure brand - Vortex? ($100) Gauge Cluster - one broken post. Still works great. ($90) 8 cell EV02 Ballistic Battery plus quick-connector. Used once. ($75) Radiator - good condition, works great, some dings/dents ($40) Gas Tank with pump, no cap - sold separately - tank has some dents and rash but works fine ($15) swingarm stand spools ($20) Stock seat, one tab slightly broken, still works prefect ($20) Starter/Kill Switch - wired as the keyed ignition module (turn on, turns bike on) some rash on top ($50) stock plastic upper - Gauge/mirrors ($50) Ram air duct ($80) Stock Triple Clamps - free GoPro connector included! ($20) Front Fender - Armor Bodies ($40) Sharkskins Tank Cover ($40) Tank Cover w/ Stomp Grips - Armor Bodies, has rash on the left side (see pictures) ($40) Rear master cylinder and calipers set ($40) Stock rear shock ($30) Misc nuts and bolts from teardown
Ignition and QS back for sale again. For anyone looking, the Ignition is a Power Comander III unit, not a V.