if you dont want the plate, find a used exogen 4000 its a bone growth promoter, i got one after 3 months of no union.insurance paid for it. 30...
or ive found the heaviest guy around or get 2 to push down/get on the bike to squat it, and take a look.
im sure you will get the right info, but some helmets m-L share the same shell and the med inners is what you would want as it would be thicker...
IIRC, my yoyo was a rebranded suter. which I was more than ok with
just last year i ran a michelin 1910, ya thats old from around 2012. now, yes i can slide a rear and have fun with it and i did take it easy...
michelin mousse. a solid foam instead of a tube
ill be coming out to give you guys headaches at the regionals this year.......................52 or 53 cant remember,
not sure if its been asked , but did you try eliminating the power source as the problem? if its 220v, for the cost call up a mobile welder and...
[ATTACH] hes 13 now maybe 7 in pic rotti/shep mix. goes by TI or shithead
been using the feminine napkin for 20 years, also keeps your helmets from absorbing it , a must in endurances, learned that from Steve Crevier. oh...
It causes a very rich effect, once the system is primed, its a hydraulic system and works perfect on one, easier to dial in.
if its turns in initially well, change your clamp offset, you need more trail, try 4mm and put the forks flush
the 93-95 do not fit 96+ be sure to disable one of the accl pumps. Ive lived on fcrs for many years, let me know if you need any set up...
i had a set of 37mm fronts made for 41s, was pretty cheap, find a good machinist
never mind its propylene-glycol based, no bueno on track
any idea if it gets slushy below -2f or would it freeze solid? i get well below that, even scared sometimes with anitfreeze in it, lol
you can get crazy and get ti axles or, ive had 7075 alum ones made for me, the zx has massive lock nuts on the engine mounts, toss those and get...
distilled yes when filling up, im referring to washing out all the residual antifreeze after storage.
a quick way too in spring to remove all glycol is after removing as much as you can normally, hook up a garden hose to the lowest line and remove...
edit.. I assumed your forks are 2006 and dont fit the clamps.
Separate names with a comma.
