I'm a big vw fan so would love a eurovan...but... Decent Eurovan : $10,000 - $20,000 Decent Astro: $5,000 I can't seem to find a...
just for clarification... zx6r inner tube (chromed shiny piece) has a bushing on the bottom. this would probably tear the Stuff out of a fork...
thanks for the suggestions! I think I'm going to see if I can find a deal on other forks just to get the bike going and in the mean time see...
1998 zx6r .. The bike has been laid down once on street before I bought it and then once in a light lowside. I've checked the forks and...
suggest using search function, lots of hits :up:
hey bro, it seems that not only do have the wrong rear spring, but that your springs are horribly uneven. A 1.0 Kg is a reasonably stiff spring...
your desired sag is usually in the range of 5 to 10 mm free sag (from unweighted to just bike weight) and 30 to 40 mm rider sag (from unweighted...
+1 = 2 for :up: could be fuel starvation, but generally my bike does this when i forget to hook up the carb pressure equalization line from...
160 sounds nice, quicker turn in and matches the bike/power :) pete, is that you ya old goat (Yellow FZR400 you used to run in Nesba?) ??
suggest setting the sag with a buddy, and having someone familiar with suspension setup shake the bike to set initial dampening.
http://www.cwmotorsport.com/video/ see above :) oregon cam original is large (250 meg), there's also a remastered version on that site....
http://www.cwmotorsport/video beaverun original file is on medium (of low medium and high) with 30 fps (of 15 or 30). They are durable,...
Generally for a racing engine you would use the higher acceptable clearance of ring gap to allow a little lower friction (though less life)....
It's not a performance modification, so if it doesn't affect safety (ridability of the bike) it should be legal. If you mount the camera forward...
that's the spirit :). The only way to learn is to keep discussing things and throwing new ideas out there, if they are 100% right or not is part...
from picture (just using torque for static, not a dynamic equation). It doesn't appear to make a big difference. If you supply the red numbers I...
I'm an sv-idiot...never worked on one..but.. the valve clearances may be off (since you mentioned head work) not sure about the carbs /...
it sounds like you went through a lot of thought on this and know what you're talking about. you are now running slicks, definately not the...
lol... people have bikes that aren't starting, suspensions that are funky, clutches that are slipping...and "how do I lube my chain" is by far the...
I read my post again, sorry for sounding harsh, I must of had a bad friday! Motorcycle racing costs money, unfortunately. The $100.00 you...
Separate names with a comma.