Hey guys im trying to get back into racing, did a few trackdays on my gsxr, and caught the racing bug again. So planning on getting back to racing, I picked up a 2017 R6 its already got a full yosh, gearing, gpr steering, case covers, and many other goodies aswell as an oem quick shifter, abs, traction control. To be honest I dont know nothing about ABS and traction control the setting or how to even set it up. Im assuming traction control is great at the track to help catch you from highsiding, but what about the ABS are you guys deleting this? I see its a pretty big unit If there are any other pointers aswell ide appreciate it.
Actually purchased it wrecked at a much cheaper price, I have other stuff to spend my money on like race fairings, suspension, tires, track fees etc.
This sounds like the way to go! Eventually I may purchase the dongle but for now. Would that kill traction control? Do I just purchase pre 2016 R6 brake lines, do I just use regular bolts to block off the abs ports? Thanks for the tips!
left my pump in place and blocked the ports, used 08-16 lines with an rcs19 for deleting ABS. TC still works
For the cheapest and easiest... Get 15+ R1 lines, and put some aluminum tape over the ports and ride the bike. You don’t ‘need’ anything else.
They do make NON ABS 17+ brake lines. I have read that some guys are complaining they are a little short. So if you go custom add a couple inches. I bought non ABS lines and had no issues. I pulled my pump and metal lines and got the dongle. They are known to go bad. You will know when your speedo and TC stop working.
I ended up buying a brembo mc and HEL 2016 r6 lines, ebc pads, im thinking of just buying bolts to just cap the abs pump lines holes and pull the abs fuses. Also, what traction control settings are you guys running on the track?
i have 08-16 gp lines and they're great. you dont need to pull the fuse for abs once its bypassed, if you do TC wont work nor will the speedo. for TC levels i run mine at 1 usually