Just seeing if anyone has one of the motion pro clip on alignment tools they dont use before I buy new
I had to shrink picture but you get idea... Started with 5/16" X 1" aluminum bar stock and drilled and tapped for allen bolt at swivel and sent 1/2" threaded rod (with two jam nuts) through the shorter piece of bar stock. Also made a cut out on opposite side of long bar stock to ensure you line it up in same spot when you flip it over. Can get dimensions tonight but you definitely have some wiggle room. Probably took me 30 minutes to make. Picture shows tool but not how to properly use! Damper must be removed on my bike. Tool lays against fork tubes..