Hi everyone - I’m parting out my 2007 CBR600RR. Lots of race goodies to be had. Here is the parts list with prices. These do not include shipping. PM, text, call or email with any questions or if you want more pictures than I posted. I’m parting the whole bike that was race ready, so if there is anything you don’t see, message me, I may have it. I’m am leaving on vacation next week, so I wanted to get these out here since I’ll be gone for 3 weeks. That way if there is something that someone is really looking for (like suspension , then they can get it sooner than later. I put everything here, but the items with pictures are ready to go. The others I still need to remove from the bike or find. (edit) looks like photobucket jacked up picture order. I'll try to fix it(/edit) Bike pics before the teardown http://s850.photobucket.com/user/fr...Partout/20180330_134818.jpg.html?sort=3&o=104 http://s850.photobucket.com/user/fr...Partout/20180330_134807.jpg.html?sort=3&o=105 ($800) Ohlins TTX rear shock http://s850.photobucket.com/user/fractal2k5/media/Racebike-Partout/20180609_130249.jpg.html ($900) Ohlins 30mm cartridge in complete forks http://s850.photobucket.com/user/fr...-Partout/20180609_130258.jpg.html?sort=3&o=38 ($250) GPR Steering Stabilizer http://s850.photobucket.com/user/fr...-Partout/20180602_171813.jpg.html?sort=3&o=74 ($400) Yoshimura RS-5 Full Exhaust http://s850.photobucket.com/user/fr...-Partout/20180609_142405.jpg.html?sort=3&o=16 ($150) Dynojet Power Commander III http://s850.photobucket.com/user/fr...-Partout/20180602_181159.jpg.html?sort=3&o=71 ($250) Dynojet Ignition Module and Quickshifter (Push type) http://s850.photobucket.com/user/fr...e-Partout/20180609_152420.jpg.html?sort=3&o=1 http://s850.photobucket.com/user/fr...-Partout/20180602_164507.jpg.html?sort=3&o=84 ($20) BMC Race Air Filter, used 4 races http://s850.photobucket.com/user/fr...-Partout/20180602_175829.jpg.html?sort=3&o=73 ($300) Armour Bodies race bodywork (Paint is chipped a bit, but it still looks good) Stomp Grip on tank cover http://s850.photobucket.com/user/fr...-Partout/20180609_142533.jpg.html?sort=3&o=12 http://s850.photobucket.com/user/fr...-Partout/20180609_142617.jpg.html?sort=3&o=11 ($30) Puig double bubble Windscreen http://s850.photobucket.com/user/fr...-Partout/20180609_142533.jpg.html?sort=3&o=12 ($150) Accossato 19x18 Master Cylinder (like new) http://s850.photobucket.com/user/fr...-Partout/20180609_105217.jpg.html?sort=3&o=57 ($65) Galfer SBK stainless brake lines http://s850.photobucket.com/user/fr...-Partout/20180609_104718.jpg.html?sort=3&o=60 ($25) Stock Front Calipers, each http://s850.photobucket.com/user/fr...-Partout/20180609_105318.jpg.html?sort=3&o=55 ($40) New EBC GPFA pads (and some mid-life Galfer 1300s) ($120, $60) Woodcraft Engine covers ($100) Woodcraft clip-ons - includes new set of grips! http://s850.photobucket.com/user/fr...-Partout/20180609_111529.jpg.html?sort=3&o=48 http://s850.photobucket.com/user/fr...-Partout/20180609_111537.jpg.html?sort=3&o=47 ($120) Woodcraft lever protectors ($60 ea) http://s850.photobucket.com/user/fr...-Partout/20180602_165434.jpg.html?sort=3&o=81 ($60) SPARE Vortex clip-ons - bar ends rashed http://s850.photobucket.com/user/fr...e-Partout/20180609_143226.jpg.html?sort=3&o=8 ($200) Woodcraft rearsets - Notice the pegs are cut down. I did this from the recommendation of a fellow racer, and it is way better than the stock length IMO. If you don’t like it you can always get new pegs to put back on. http://s850.photobucket.com/user/fr...-Partout/20180603_140738.jpg.html?sort=3&o=66 http://s850.photobucket.com/user/fr...-Partout/20180603_140730.jpg.html?sort=3&o=67 ($25) Woodcraft frame sliders Woodcraft Shark Fin ($150) SPARE Sato Racing Rearsets (can be used for standard or GP shift with the push quickshifter. Standard required the use of an extra pivot piece and 2 rods in the system) http://s850.photobucket.com/user/fr...e-Partout/20180609_143807.jpg.html?sort=3&o=2 ($40) HRC 1/6 quick turn throttle http://s850.photobucket.com/user/fr...-Partout/20180609_110528.jpg.html?sort=3&o=49 ($80) Vortex V3 gas cap http://s850.photobucket.com/user/fr...-Partout/20180609_141849.jpg.html?sort=3&o=29 ($150 set) rims with brake disks, front/rear, 2 sets, these plus the ones on the bike. http://s850.photobucket.com/user/fr...-Partout/20180330_140920.jpg.html?sort=3&o=98 ($50 all) SPARE Multiple rear sprockets of different sizes (42, 41, 41, 39) http://s850.photobucket.com/user/fr...e-Partout/20180609_143108.jpg.html?sort=3&o=9 ($25 ea) 2 rear cush drive ($100) Pit Bull rear stand ($100) Pit Bull fork lift front stand ($100) Headlift Stand - not sure brand - Vortex? ($25) Factory Service Manual ($190) Woodcraft Tire Warmers with carry bag - good condition - you can see the rear has a small tear with part of the heater exposed. http://s850.photobucket.com/user/fr...-Partout/20180330_141734.jpg.html?sort=3&o=91 http://s850.photobucket.com/user/fr...-Partout/20180330_141821.jpg.html?sort=3&o=90 http://s850.photobucket.com/user/fr...-Partout/20180330_141924.jpg.html?sort=3&o=89 http://s850.photobucket.com/user/fr...-Partout/20180330_142008.jpg.html?sort=3&o=88 ($100) Chicken Hawk (Michelin branded) Pole Position front tire warmer http://s850.photobucket.com/user/fr...-Partout/20180330_154232.jpg.html?sort=3&o=87 http://s850.photobucket.com/user/fr...-Partout/20180330_154858.jpg.html?sort=3&o=86 ($40) Stock brake disks ($100) Gauge Cluster - one broken post. Still works great. http://s850.photobucket.com/user/fr...-Partout/20180602_170502.jpg.html?sort=3&o=80 http://s850.photobucket.com/user/fr...-Partout/20180602_170510.jpg.html?sort=3&o=79 ($90) 8 cell EV02 Ballistic Battery plus quick-connector. Used once. http://s850.photobucket.com/user/fr...-Partout/20180528_145250.jpg.html?sort=3&o=85 ($75) Radiator http://s850.photobucket.com/user/fr...-Partout/20180609_105855.jpg.html?sort=3&o=54 http://s850.photobucket.com/user/fr...-Partout/20180609_105904.jpg.html?sort=3&o=53 http://s850.photobucket.com/user/fr...-Partout/20180609_105908.jpg.html?sort=3&o=52 ($40) Gas Tank with pump, no vortex cap - sold separately ($15) swingarm stand spools ($20) Stock seat, one tab slightly broken, still works prefect http://s850.photobucket.com/user/fr...-Partout/20180609_141901.jpg.html?sort=3&o=28 http://s850.photobucket.com/user/fr...-Partout/20180609_141906.jpg.html?sort=3&o=27 ($50) Stock tail section battery holder panel. This has high temp heat shield on it. Small crack/hole that doesn’t affect it at all. http://s850.photobucket.com/user/fr...-Partout/20180609_142339.jpg.html?sort=3&o=17 http://s850.photobucket.com/user/fr...-Partout/20180609_142330.jpg.html?sort=3&o=18 ($20 ea) Starter/Kill Switch - one is wired as the keyed ignition module (turn on, turns bike on), and the other is stock. http://s850.photobucket.com/user/fr...-Partout/20180609_142815.jpg.html?sort=3&o=10 ($50) Gauge/mirror upper http://s850.photobucket.com/user/fr...-Partout/20180602_170839.jpg.html?sort=3&o=78 ($50) Ram air duct http://s850.photobucket.com/user/fr...-Partout/20180602_171340.jpg.html?sort=3&o=77 ($275) AMB TranX 260 wired transponder - never worry about charging! http://s850.photobucket.com/user/fr...-Partout/20180602_165315.jpg.html?sort=3&o=82 Darrel Cherry Former Utah MoM #18 PM, text or call 208 four9four ten ninety-eight
Interested in the clip-ons and throttle, how much shipped to 79928? Does the throttle need something additional to change the OEM one? Sent from my iPhone using Tapatalk
Looks like about $13 to ship, so $153 for the woodcraft clip ons and the 1/6 throttle (and the new grips ). Nothing special needed, just need to adjust the throttle cable to accommodate the new throw.
brake lines are: 25" and 27" not including the connector. to everyone who PMed me, I'm sorting out the messages/parts and will get back to you
Brake Lines SOLD Both Sets of Rims SOLD All Tire Warmers SOLD Woodcraft Clipons SOLD Woodcraft hand protectors SOLD Pit Bull stands SOLD HRC Throttle SOLD some other items on-deck waiting for payment, so PM me about anything else not sold.