1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

FS: 1997 Honda CBR600F3 Team Zero Gravity AMA Supersport racebike

Discussion in 'WERA Vintage' started by maxleanangle, Sep 13, 2024.

  1. maxleanangle

    maxleanangle Well-Known Member

    1997 Honda CBR600F3 Team Zero Gravity AMA Supersport racebike. Eric Bostrom’s “A” bike for his first season in 600 Supersport, confirmed by the manager of Team ZG in writing. Never titled, have copy of Team ZG's MSO as well as Bill of Sale from 2nd owner.

    3rd owner (2nd owner since the race team). Been stored since 2022, thining out the stable and ready to pass along to a good home. Just took pictures of bike and spares (full album - https://photos.app.goo.gl/5kbNZKHQR946b6LSA).

    $2,300 takes everything listed below. Located in 30290 (Tyrone, Georgia).

    Bike details:
    - Never high-sided, straight frame
    - “EB” paint marks on airbox and engine block
    - Engine balanced and blueprinted, assembled according to 1997 AMA Supersport regulations.
    - Have dyno results from when purchased. Engine never opened, ran strong when parked.
    - Original Penske triple clicker, serviced by Thermosman
    - Original Kerker full-system exhaust
    - Original tank, fender, seat, fairing stay, and bodywork (flat black, repairs by Mark, The Plastic Dr, could use some minor repair)
    - Original Factory Pro alternator cover
    - Forks were found to be OEM, upgraded to Racetech, installed and serviced by Thermosman
    - Upgraded to Vortex bars
    - Vortex rearsets
    - Upgraded to Brembo front master cylinder
    - Jet-hot coated exhaust headers and mid-pipe
    - Upgraded to F4i radiator for additional cooling

    Plus:
    - 3-ring binder of documentation (all in plastic page protectors) – Copy of MSO, e-mail from “Glenn aka Mr Gravity”, Dyno results (92.7HP, 43.8lb-ft), Racetech tech specs, Penske shock Technical Manual, Honda Service Manual
    - New, never drilled Airtech upper and tail section
    - New Airtech fender, never mounted
    - New, drilled lower (not Airtech, no manufacturer markings)
    - Spare Airtech fender, painted by Team ZG
    - Spare Kerker exhaust canister
    - Spare wheels with rotors
    - Two spare tanks - one clean '98 tank (red), another with minor damage (blue)
    - Tub of spares – NRC case covers, frame sliders, Vortex bars, Vortex rearset components, brake pads, gearing, chain, clutch and throttle cables, etc.
     

    Attached Files:

    yamageezer likes this.
  2. riversbikes

    riversbikes Well-Known Member

    Great deal. Too far away for me, so good luck with the sale!
     
  3. rd400racer

    rd400racer Well-Known Member

    It's in my garage, well actually at the shop being reborn.
     
  4. maxleanangle

    maxleanangle Well-Known Member

    Sold! Went to a great home, look for it out on track!
     
    Buell1965 and rd400racer like this.
  5. Ricky Mendez

    Ricky Mendez New Member

    Can you call me about this one? I was the ZG mechanic on this bike and want to know if there is anything left or track the new owner. I am building a F3 now for myself. Rick 864-252-5496
     
  6. Ricky Mendez

    Ricky Mendez New Member

    Did you buy the Zero Gravity F3?
     
  7. rd400racer

    rd400racer Well-Known Member


    Yep, sorry, just saw this post.
     

Share This Page