1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

2nd Gen SV 650

Discussion in 'Bikes for Sale' started by bryan4140, Nov 4, 2025.

Tags:
  1. bryan4140

    bryan4140 Member

    I bought this bike summer of 2019, and have done a few sprint races, 1 ASRA endurance race, 1 WERA endurance race, and most of the N2 practice days for endurance from 2020-23. I raced endurance from 20-23 on a different bike besides the 1 event where this bike was used. It is in good condition and ready to hit the track. I have been riding supermoto much more lately and this bike has only been used twice the past two years (track days) so it is time for someone else to enjoy it.

    This is the basic build list:

    Front end has Ohlins cartridge kit in it. Fabricated and installed by Thermosman
    Rear shock is a Penske Double Clicker. Bike is set up for 180 lb rider.
    Radial brake caliper adapters for 100mm mount spaced calipers. I have 5 sets of pads that will go with the bike.
    Galespeed master cylinder
    OEM Style Fiberglass fairings, no patches. Scratches from trailer time. Ghetto customs superbike seat/tail. I will also include the oem seat, subframe, and race tail.
    Race fairing stay
    Key delete
    Vortex gas cap
    Woodcraft clip ons
    Aim lap timer mount
    M4 full exhaust
    Power Commander with 2 maps tuned on dyno. 93 and mr12. Tuning done by Full Spectrum out of Longwood, FL. PC Quickshifter, GP pattern
    Vortex rearsets
    Shorai Lithium battery
    Coolant lines Red Silicone
    Stomp Grip tank pads
    Motion Pro Rev 2 quick turn throttle
    GSXR 600 rear wheel conversion, bike comes with two sets of wheels
    I have two rear slicks, 3 front slicks and a set of rains that can go with the bike, all with life left. Fronts are MA take offs with about 20 laps ea.
    Spears Motor notable upgrades:
    Hi comp pistons, stock bore
    Lightweight starter clutch
    lightweight rotor
    Carillo Rods
    New shift star
    New oil pump.
    New clutch
    Slipper clutch - Sigma
    Engine work was done mid 2017 by previous owner whom only did a handful of track days.
    Coolant is Engine Ice

    I just did a fresh oil change, put new plugs in and inspected the slipper clutch which measured within spec.

    Asking $3800
    Located in Milwaukee WI
    Feel free to email me: [email protected]
     

    Attached Files:

    rcarson15 likes this.

Share This Page