Way to go JB and team!!!!!!
In our experience, first of all 32mm of total front sag is usually not enough depeding on what type of riding your doing. That being said, if...
GMD has made triples, mainly the Boston location, and he choose to use the same style offsets as Kosman to make it easier for people to get. Some...
The main issue here is lack of trail. When you change the wheels of a dirt bike for SuperMoto, you take all the trail out of it. That's why it...
Give us at call at 706-253-1148 and we can help you out.
Post a picture of the whole bike in a side view. Since you said it had been rear ended, we have seen in the past where the linkage was bent....
RIP You will be dearly missed by all!
+1
Lowering links are not the way to go. We have lowered many bikes through the years. To do it properly, it needs to be done internally in the...
'Gmd Atlanta' Kent Soignier Go to our facebook page and look at the confidence Chris has. We installed adjustable triple clamps on his bike to...
We had a customer in the shop this morning and Bill's name came up. We are deeply saddened by this event and our sympathy goes out to family and...
R.I.P.
The GMD Computrack system has measured several World Superbikes over the years. As everyone has said, setups are different per bike, per riding...
As we said in our email to you, we can take care of that for you.
Check your pm
Our hearts and condolences go out the all the friends and families of these three boys. May they rest in peace.
You can send us the complete front end minus the wheel and we will straighten what we can. We will service the shock for you as well of course at...
Based on what you are saying, your triples are tweaked. Forks may be as well. We straighten triple clamps daily. Give us a call and we can...
Unfortunately, this broadcast is going to be more on the recent passing of a 13 year child in this sport. I thought that is what I heard this...
What triples do you have? The GSXR triples have more offset than the stock Sv tiples which is why a lot of riders who make this change have these...
Separate names with a comma.
