some parts -the upper and the fenders look great, the seat is wacked i put on 2 coats primer one 3 coats paint - do i dare wet sand and buff in...
i tried another piece of body work i used 2 coats of primer followed the direction religously i am using mkt paint single stage paint still the...
i didnt use primer i just sanded washed and de greased do i really need primer?-rp
why am i getting little tiny bubbles(the size of a pencil dot) in my paint i am using a single stage paint in a new reconditioned gun -rp:eek:
paxton patterson phone 1-800-323-8484 x3 sells a couple of kits w/ a plug adapter @ extention stock#6487-$79 or stock#186240-$89. otherwise doug...
from start to finish i replaced bottom end bearings, piston rings. i had the heads and block skimmed (i will have to look up the specs)i also had...
yes that is good advise it is much more fun to ride than to push your tricked out race bike around the padock-i tried for 3 years to build the bad...
Where would a 1990's gs500 fit into the vintage classes and would it be competive-rp
I thinking of you and your wife - dont give up!in 1986 i crashed on the street and had a pretty nasty open fracture of my tibia and fibula. My...
I WISH I HAD MY CYLINDERS ,HEADS AND CARBS BACK FROM A CERTAIN RD GUY WHO SHALL REMAIN NAMELESS I FIGURED IF I SENT THEM LAST OCT. THEYD BE READY...
does anyone have lynne Garlands email or web site address i followed someone elses advise and bent up a belly pan out of sheet aluminum and had...
spargo -i have no chance in hell of winning a race or even going to a race and having a running motorcycle
chris -got your wheel spacer done bring me some tequila it cold up here
rd 350 what type of horse power should i expect with light ported cylinders spec2 pipes head milled 29.3 carbs-rob
the motor has light porting, pipes 29.3 carbs i plan on running hallet,summit point,putnam park,vir thanks rob
i am almost finished with my formula rd bike - even fabricated a high tech space age belly pan ! i need gearing my question is what gearing do i...
you got it ... rob tulie is a prime example the guy can get on anything any ride like hell his norton is a prime example the front end flexes so...
i got a couple of spare carriers around if you need one-rob
What is the stock piston bore if you figure out the ratios a 13mm would work best although no clear answer on the size of the stock set up
what size master cylinder do i have to use on my forula rd bike
Separate names with a comma.