Thanks for the input and posting the tables! :beer:
I'm looking for a used Suzuki wheel and brake rotors for an '06 GSXR1000 front end. I know the wheels and rotors are same for the '05 & '06 model...
Despite the rain Saturday and throwing the bike down under the Honda bridge while chasing Mike Flis in Stars HW, I thoroughly enjoyed the weekend....
All the oil dry reminded me of my younger days riding the dusty back roads in Brown County - also allowed me to move up to 2nd in Formula 1!...
The Files 5 Racing crew has all those effected by this tragedy in our prayers
Congratulations Pete!
Rich, Do you still have the 60mm sleeves and pistons you purchased or the YZF?
In my view there is no real benefit to using a 400 head in your 560. I ran 24mm FZR600 intake valves in the 460 I ran last year and ended up...
Thanks Don for the recommendations. I'll do the compression check and that should tell me how well the valves are sealing up to the seats. I...
Thanks, good point. If it were, any reasonable chance it could clean up (without loosing too much sealing surface) by just running the engine?
Thanks RB . No, unfortunately this is the first time I've laid hands on it. I recently bought the engine from the person who had it built....
My experience with DOHC 16V motorcycle engine valve clearance has been they tighten up as the engine accumulates running time. I believe this is...
Hang in there and remember miracles happen every day. Young Mason is in our family's prayers.
Thanks Bee! :clap: This is great news for me - my 400 engine fell off the engine stand last month and broke the tab off the left front of the...
I must be in denial about the onset of winter :(
YOW! Now I don't feel so bad about the dented tailgates I've created in my lifetime. Can you just imagine the light show coming off of the...
Hey Erin, We had to use the green, Loctite bearing mount adhesive (660 and 680) a time or two back in my hydroplane racing days. It allowed us...
After further thought, pressure drop across the filter with a short, 2 5/8 - 3 1/4 length may be too high (not enough media surface area causing...
My day job (which I am taking a break from at the moment to type this!) involves working with construction equipment OEM's on the design and...
Come on over to Columbus Indiana for the Stewart homecoming parade - free chocolate shakes at Tony's favorite, the 3rd st. DQ !:beer:
Separate names with a comma.
