One of my co-workers is big into snowmobiling and unfortunately had a catastrophic engine failure his first trip out this year. Funds are tight, just trying to help him get back up and running he loves snowmobiling like we love racing. I've seen what this community can do. Any help or insight is appreciated. Any used motors out there? The sled is a 2012 Ski-Doo GSX SE with a 600 E-Tec 2 stroke engine. Thanks in advance Located in the Chicagoland area, but he often travels to the upper peninsula. Or I'm sure shipping could be figured out
Ebay. or you might call mcb they dont have this in stock but, may be able to steer you in the right direction. Ski https://mcbperformance.com/i-234303...ons-cylinder-full-gasket-set-mcb-stage-3.html or call Big John at Sledhead racing, he should be able to point you in the right direction. https://www.sledheadracing.net/engine-performance
You can try King Blunder in Fort Atkinson WI. They're a sled salvage yard / shop. It can be a little rough around the edges there, but I won't take my sled elsewhere. Call during the day, it gets very busy there after work and on weekends. https://kingblunderenterprises.com/
How bad it it pop? Being a 2 stroke I'd at least pull the cylinders and see what's going on. Perhaps pistons and replacement cylinders will get him back going rather than sourcing an entire new engine.
How to Prepare for Snowmobiling 1. Go to your local snowmobile dealer, smile and give the first guy you see $500. This will get you used to spending money there on a regular basis. 2. Fill a 45-gallon barrel with sand. Lower it into a hole. Now lift it out. If you can, add water to the sand and try it again. Do this 5 times per day. This will get your back in shape for lifting your sled out of the deep snow. 3. Tie a rope to a heavy-duty spring. Pull the rope repeatedly with each arm until the pain in your shoulders meets somewhere in middle your back. This will get you in shape for starting your bud's sled, which he conveniently forgot was out of gas. It's best to do this exercise while someone is spraying starting fluid into your nose and eyes also. 4. Drink four ounces of cod liver oil mixed with a strong laxative. Dress with long underwear, wool pants, snowmobile bibs, insulated boots and heavy coat. Walk far into the woods without any paper products and wait for a personal emergency. This get you prepare for the Beer shits that come out of nowhere, and at the wrong time. 5. Place your hands in a bucket of ice water for 20 minutes. Put the carburetor from your lawn mower in the bottom of your deep freeze. Now climb in the deep freeze, shut the lid and overhaul it while holding a pen light in your mouth. This gets you prepared to work on your sled in the freezing cold and black of night. Advanced riders do this with a leatherman tool. 6. Dress up in your new $400 snowmobile bibs. Pour 2 stroke oil down the right leg, gasoline down the other and Peppermint Schnapps and Beer all over the front. Fill your boots with ice cubes and ask your wife or girlfriend to dance. This will prepare her for the stops at the local bars during a ride. 7. Put on a Balaclava and a full-face helmet. Attempt to drink hot chocolate through the opening. Advanced riders attempt this while riding a lawn tractor over in the nearest farmers' plowed field. 8. Find a place where you can pay $5.50 for regular gas; $29.99 per litre of oil; $16 for a Hamburger and frozen French Fries; $3 for a coke and $160 to sleep in a cold cabin on a bed with springs sticking through the mattress. Stay for two nights, minimum. This will prepare you on the high cost of your future winter trips. 9. Practice explaining to your banker why you need another loan for a $70,000 truck to pull the four $20,000 sleds, on your $15,000 trailer that you still owe $50,000 on. Now, you are 50% ready, and somewhat conditioned to head for the trails and ride your sled.
Pull the head, super easy to do, and take a look see at the cylinders and pistons. I’ve never had any doos but I do seem to remember seeing some grumblings about having to use isoflex grease on sealed crank bearings on a somewhat regular basis. Good luck. Last winter I broke a piston skirt and holed the case on my Polaris 700. Ended up buying a rebuilt engine off of flea bay.
Very true. But having a fuel injected two stroke get on the pipe with a good picked track makes it almost worth it
Lol thanks for all the replies. I tend to agree with the rant posted above. Winter sports are not my thing, but I will pass all info along. The sled isn't here or else I'd tear it apart for him. Again, thank you everyone for the insight.
I know you probably know this but, he may not. find the root cause, or rebuilding may result in the same outcome, in short order. crank seal leak, carb/tb boots etc. doo's have the super expensive isoflex grease in the lower bearings, as noted above. make sure to check the lower end, bearings, crank for play/run out. Ski
It's the winter equivalent to seadoos. Get ridden WFO 90% of the time, by complete muppets (myself included) with zero preventative or reactive maintenance ever. . Fun though!