1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

1st Gen Sv650 Race bike part out.

Discussion in 'Parts for Sale' started by Josh Whitehead, Jun 14, 2016.

  1. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    I have a 2000 SV650 that I have built and raced over the past 8 years but after getting hurt back in 08/15 and having made the decision to get out of the sport I have decided to part out my beloved SV650.

    The bike has a bunch of high end and quality parts so if you don't like the prices you don't have to buy them.

    All parts are coming off of a 1st gen SV650, they may fit others I but i don't know.

    All prices are negotiable and the more you buy the better the prices.

    Parts can be delivered to any SE WERA Event



    Complete 03-04 R6 front end package for 1st gen SV $1800
    This is by far the best handling front end you can put on a SV650
    03-04 R6 front forks with Ohlins 25mm cartridge kit, completely overhauled by Mike Fitzgerald of Thermosman Suspensions. (Bushings, seals, fluids and so on spring of 2014)
    R6 front brake master cly with lever and res.
    R6 front brake calipers
    Galfer Stainless steel brake lines
    Carbon Loraine SBK brake pads (2-3 track days on them)
    Modified R6 triples with SV650 steering stem and spacers
    Woodcraft 1.5" risers 43 mm clip-ons (puts bars at normal sv650s location)
    06-07 GSXR steering dampner with brackets for R6 front end
    03-04 R6 front fender
    3 Front wheels with rotors and 90 degree valve stems.
    and all bolts and hardware for installation.

    Ohlins rear shock $700 - Service by Mike Fitzgerald of Thermosman Suspensions in the spring of 2014.

    Translogic Quick Shifter $350

    GSXR Rear Wheel conversion $450
    Complete GSXR Rear wheel conversion kit (sprocket carrier, spacers and rear brake caliper bracket)
    2 rear wheels with SV650 rotors
    1 rear wheel no rotor

    Yoyodyne slipper clutch $600
    This clutch has worked flawlessly for years

    Superstock engine $600 - runs super strong put down 72hp to the wheel

    Euro Racing quick turn throttle with cables $150

    PWR oversized radiator $250 (was $500 new) will need two mounting tabs reweld.

    Woodcraft rearsets $295 - like new

    Race only wiring harness with start/stop/kill switch $125

    Leo Vince SBK Exhaust full system $300

    GP Tech Fairing Stay $85

    R&R Aluminum rear subframe $195

    Vortex Keyless gas cap $50



    Parts are located in Chapin,SC 29036

    E-mail [email protected]

    cell 803-361-8970

    work 803-345-8585
     
    Last edited: Jun 14, 2016
  2. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    Rear sets have been sold
     
  3. Phl218

    Phl218 .

    Do you know if that fairing stay will fit a 2nd generation?
     
  4. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    It might, the bolt holes on the fairing stay measure 60 mm center to center
     
  5. Phl218

    Phl218 .

    I will know on Friday, ok?
     
  6. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    Exhaust has been sold
     
  7. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    Ohlins rear shock has been sold
     
  8. Phl218

    Phl218 .

    dibs.

    should fit.

    i will text ya, might come pick it up tomorrow.

    thanks!
     
  9. Phl218

    Phl218 .

    Thanks! Great seller!
     
  10. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    Fairing Stay and Radiator have been sold.
     
  11. Josh Whitehead

    Josh Whitehead Crash Test Dummy

    Engine, slipper clutch and quick shifter have been sold
     
  12. SVbadguy

    SVbadguy I survived the Mt Course

    Carburetor set?
     

Share This Page