Add strength and good looks to your motorcycle’s engine cases with these aftermarket case covers from Woodcraft Technologies. OEM case covers are often made of thin cast metal that’s weaker than these CNC-machined beauties making them unreliable in a crash situation. The damage can be more than cosmetic, with leaking fluids, damaged stator parts and a time-intensive repair that won’t be cheap or easy. Woodcraft case covers sculpted from 6061 billet aluminum, the one-piece design is as artful as it is purposeful and will provide additional strength to areas that traditionally don’t always hold up so great in a crash. Woodcraft case covers are engineered for a perfect fit and will not induce any bodywork clearance issues at all. And because they’re made in the USA by Woodcraft, each cover comes with a replaceable skid pad that’s designed to take the brunt of the crash, leaving you with a case cover that’s much less likely to require a total replacement. And, spare crash pads are available in your choice of stainless steel (thinner, for race applications) and black, blue, red or clear finishes. Each case cover kit also includes a new gasket, so you don’t have to worry about sourcing any additional parts to get them installed. Available for most late-model sportbikes. Woodcraft products are not yet available on our website. For more information, call TJ at 866.931.6644 ext 817 or send him an email – WERA at RIDERSDISCOUNT dot COM with WOODCRAFT ENGINE COVERS in the subject line along with the model and year of the motorcycle you ride and we’ll get back to you right away. Woodcraft Case Cover kits are sold individually for each side of the engine. The finish machining of each case cover is brilliant and these will not go unnoticed at the track or on bike night. A look inside the stator cover reveals that all mounting points for the OEM hardware have been drilled and tapped. All passages for routing the wiring safely have also been retained. The arrangement replicates exactly the OEM hardware and wiring setup for reliability and ease of installation. In addition to being more crash worthy, Woodcraft’s ignition timing covers are much more attractive piece than the original part. Here, you can see the thickness of the crash pad that’s included with every Woodcraft case cover kit. These are positioned in areas most likely to contact the ground in a crash, leaving you with only the crash pad to replace after they’re put to use. Woodcraft crash pads are attached to the case cover with three bolts from the inside which helps to ensure that 1). The piece does not fall off in a crash and 2). That the pad can be easily replaced after a crash since the attachment hardware will not be ground away. Check out that finish machining! Beauty is in the details. Woodcraft case covers retain OEM functionality with added crash protection. This tab replicates that which is found on the OEM case cover where you can drill it, if needed, for attaching an anchor point for the oil filler cap’s safety wire. Crash protection aside, little things like these indicate how serious Woodcraft is about building a quality product.
GSXR600 & GSXR750 Woodcraft stator cover. Woodcraft BMW S1000RR ignition timing cover (top) and stator case saver (bottom) Gen 3 Kawasaki ZX10R Woodcraft ignition timing cover.
Yoshimura has a different concept for their Case Savers. Woodcraft replaces the left side cover where Yoshimura has a guard that they bolt over the OEM cover. They both work well but the Yoshimura is obviously less money because there is less to it.
is this the same cover and price for the 07 600rr? is shipping included? also i remember you posting the yosh case savers a while back, but they did not have any for an 07 600rr. any updates on that?
Pardon my newbieness but how involved is the install? Is it as simple as unbolting the stock cover and bolting up these?
It depends on what cover we are talking about. Some of the covers are more involved because they will have the stator installed and others will have starter gears etc. As long as you are mechanical it is a do it yourself job. If you don't want to worry about the install we also have the GB covers that bolt over the top of the oem covers.