I have a 04 gsxr 1000, And I decided to add a Dynojet quick shifter. but now my FI light comes on after my first upshift. It goes away if you full the clutch in and cycle the kill switch but come right back on when you shift. Is there anything I can go to fix this.
I have a PC3. No ignition module though. I enable the shifter and changed the the kill time to 55 milliseconds to see if that would fix it but no go. What crazy is you can put the bike on stands and quick shift away with no FI light. But when you ride it, you get the FI light after the first up shift.
Do u have the code reader? Or is the fi light just coming on? I don't know much about the 04 but I have an 06 race and you have to have the ignition mod in order to use the QS! That may be ur prob let me look into be back in a few
Yeah you need the ignition mod my friend. The ig mof plugs into the pc3 where ur QS is plugged into at the moment and ur QS plugs into the ig mod! That's why ur getting a light
That bike is not supposed to require an ignition module for the quick shifter. There's something else going on with the installation.
Use the plug under the tail section to pull the code. You can find out exactly whats wrong and fix it instead of spending a week randomly making changes.
its a 4 injector bike...no need for Ignition module guys. take a piece of safety wire...the big white plug in the tailsection, take rubber cap off..there is a blk/wht and a wht/red wire...jump them...start/run bike and see what code pops up in the dash where water temp is normally.
First.. What do I need to pull codes? Second ed who? Don't have me blowing up my bike..lol J/K. I will give that a shot tomorrow. But I found something else weird. If I use the quick shifter at about quarter to half throttle while riding it doesn't give a FI light. I can also disable the quick shifter and run it normal with no issue.
Try a firmware update on your PC3. I don't know specifics for your bike, but for some other bikes that often cures random FI light issues. A call to DJ support wouldn't hurt either, a few times they have emailed me "patch" software for certain problems.
I got in touch with power commander online service and they uploaded something on to my bike that fixed the problem. Donno what though. Thank for everyones help.