1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I need a new handgun...lets talk guns today. :D

Discussion in 'General' started by Kris87, Mar 17, 2010.

  1. I always use Talon grips. You can get them cut specific for the gun, and I always keep some of the “blank” square sheets for using on other things.

    They will stick even to a grip that already has the stippling like the Boresight one.

    You just clean it really well with some alcohol prep pads (I always have those on hand, you can get boxes of them on Amazon for next to nothing), then wrap it in place. Once it’s where you want it, heat it up real good with a blow dryer.

    Then squeeze it real hard and press it into place while it cools off.

    Done.

    I’d say probably half of my guns have talon grips.
     
    GixxerJohn011 likes this.
  2. BC

    BC Well-Known Member

    Will the X-Macro Mags work in the XL?
     
  3. GixxerJohn011

    GixxerJohn011 Well-Known Member

    Yes
     
  4. Jedb

    Jedb Professional Novice :-)

    That's what she said...
     
    Gorilla George likes this.
  5. GixxerJohn011

    GixxerJohn011 Well-Known Member

    Nice! They make a set for my Ruger that I don’t give two shits about. I imagine they’re a pain to remove, that will be a good gun to try them on.
     
  6. Clay

    Clay Well-Known Member

    What is your full setup there? And do you front or back carry it?
     
  7. It is a combo of belt and holster from Aliengear and UnderTech Undercover (can’t remember which came from which).

    I carry at 4 o’clock.
     
    Clay likes this.
  8. Triple X

    Triple X Well-Known Member

    You ever shoot anything with a comp in low light?
    That flash makes them a no-go for me.
     
  9. Triple X

    Triple X Well-Known Member

    I love my Shield.
    Changed the trigger to an Apex one and added night sights.
    Pretty soft shooting for a carry gun.
    Thinking about getting a Shield plus.
     
  10. Razr

    Razr Well-Known Member

    There isn't much crime at 4pm, I'd carry it later!
     
    StaccatoFan, Saiyan66, sanee and 3 others like this.
  11. Sabre699, Razr and GixxerJohn011 like this.
  12. Or you could be like me, use some high dollar molding putty and make a custom imprint of your had. Let it harden a bit. Taken off. Sand etc by hand. Rinse repeat until to my liking. 3D scan, merge it with the scan or the gun in cad. There ya have it. A grip that god knows what it would actually cost. I still want to make a carbon grip.
     
  13. GixxerJohn011 likes this.
  14. GixxerJohn011

    GixxerJohn011 Well-Known Member

    Yep, no optic so :Puke:

    However, I have turned into the “gun guy” in my group and at least once a month get asked for a good cheap gun…I think I have a new suggestion.
     
    Gorilla George and Razr like this.
  15. Razr

    Razr Well-Known Member

    Yea that gun is a good deal before the discount, no problem promoting it.
     
  16. As far as value, at that price it’s a good value for the dollar for the person who only has x to spend.
     
  17. GixxerJohn011

    GixxerJohn011 Well-Known Member

    Gorilla George likes this.
  18. 2nd godamn day and the Dagger won’t load a round. It jams up the same way every time.

    44EA25C7-BD8B-409D-8BA3-4FD173DA5075.jpeg

    868F93A2-821E-4D01-B8D7-F1FE26574218.jpeg

    I’ve tried 4 different mags, even tried an OEM Glock mag. I’ve also tried about 8 different kinds of ammo (HP, FMJ, and Fluted from multiple manufacturers) and nothing will feed.
     
  19. fastfreddie

    fastfreddie Midnight Oil Garage

    Count your lucky stars, you've had one hell of a track record with your number of purchases.
     
    Sabre699 and Gorilla George like this.

Share This Page